Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993816 DEA: 07326804 EFIS: 0716000119
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-210-R9.7/R51.9
Work Description: Design and construct the State Route 210 ADA Curb Ramp Upgrades Project through a design-build contract.
Location Description:
Contractor Name: SULLY-MILLER CONTRACTING CO.
Contractor Address: 135 S STATE COLLEGE BLVD #400, BREA,CA 92821
Resident Engineer: Norie Corpuz Structure Rep.: Unknown
DIME Sample ID: 2023-04-06-52
TL Number from the TL Form:
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Department Acceptance
Type of Material: Soil
Sample Taken Date: 04/06/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2023
The quantity of what the sample constitutes: 10 yd2
A brief description of the sample: Soil for Aggregate Base
From where was the sample collected: Job Site
Laboratory sample identification: 23-0391
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: N/A
The fabricator's/manufacturer's product name for the sample: Aggregate Base
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: From various locations at Aggregate Base
Where the material sample would have been placed if not sampled:
DIME Test ID: 2023-04-06-52-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 05/05/2023
Date Tested: 04/06/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Standard Count Density
|
2340 g/cc
|
|
Count or Density 1
|
2.13 g/cc
|
|
Count or Density 2
|
2.07 g/cc
|
|
Count or Density 3
|
2.09 g/cc
|
|
Standard Count Moisture
|
630 g/cc
|
|
Moisture Count 1
|
0.24 g/cc
|
|
Moisture Count 2
|
0.25 g/cc
|
|
Moisture Count 3
|
0.26 g/cc
|
|
Sum of Count or Density
|
6.29 g/cc
|
|
Average of Count or Density
|
2.1 g/cc
|
|
Sum of Moisture Count
|
0.75 g/cc
|
|
Average of Moisture Count
|
0.25 g/cc
|
|
Calculated Percent Relative Compaction
|
94.9 %
|
|
Reported Percent Relative Compaction
|
95 %
|
DIME Test ID: 2023-04-06-52-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 05/05/2023
Date Tested: 04/06/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Is oversize material
|
No
|
|
In-place wet density
|
2.1
|
|
Highest adjust wet density
|
2.21
|
|
Relative compaction
|
95
|
|
% Moisture
|
13.5 %
|
|
Optimum Moisture
|
11.5 %
|
