Print Report | Back to Sample Detail

Sample Record for 2023-04-18-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994078 DEA: 060X7604 EFIS: 0618000129 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-119-0.2/0.6
Work Description: INSTALL LEFT-TURN CHANNELIZATIONS, CONSTRUCT WIDENING, RHMA OVERLAY.
Location Description: KERN COUNTY IN TAFT FROM 0.1 MILE NORTH OF GARDNER FIELD ROAD TO 0.5 MILE SOUTH OF ASH STREET
Contractor Name: Granite Construction
Contractor Address: 3005 James Road, Bakersfield, CA 93308
Resident Engineer: Jake Garcia Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-04-18-30
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/18/2023
The quantity of what the sample constitutes: 10 boxes HMA type A, 2 bags of aggregate
A brief description of the sample: 3/4" HMA Type A
From where was the sample collected: Source
Laboratory sample identification: L1SL2
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Solari

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 2
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-04-18-30-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/19/2023
Date Tested: 04/18/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7328.4 grams
Mass of oven-dry sample in air for Sample 1 2613.6 grams
Mass of container filled with the sample and water for Sample 1 8911.1 grams
Temperature of Water 72 °F
Specific Gravity for Sample 1 2.535
Theoretical maximum density at 25°C (77°F) 2527.6 kg/m^3

Test 2 of 4

DIME Test ID: 2023-04-18-30-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/19/2023
Date Tested: 04/18/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 4190.8 g
Mass of the specimen and specimen basket assembly prior to ignition 6291.7 g
Mass of HMA Sample prior to ignition 2100.9 g
Corrected Asphalt Binder Content 4.29 %
Mass Loss 101.9 g
Mass of aggregate remaining after ignition 1999 g
Correction Factor (Percent by mass of HMA Specimen) 0.56 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test 3 of 4

DIME Test ID: 2023-04-18-30-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/19/2023
Date Tested: 04/19/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: L1SL 2 Core 2A= 95.4%, 2B= 92%, 3C= 92.8%
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.381
Bulk Specific Gravity 2 2.293
Bulk Specific Gravity 3 2.313
Average Bulk Specific Gravity 2.329

Test 4 of 4

DIME Test ID: 2023-04-18-30-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/19/2023
Date Tested: 04/19/2023
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: L1SL2 2D= 93.5%
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.303