Sample Record for 2023-03-14-19
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214337 DEA: 080E33U4 EFIS: 0817000075
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-115-R7.3/R10.0
Work Description: ADD WB AUX & EB DECEL LANES, WIDEN I15 SW CONNECT,RAMPS/BRDG
Location Description: SAN BERNARDINO COUNTY IN ONTARIO FROM 0.2 MILE WEST OF CUCAMONGA CREEK BRIDGE TO MILLIKEN AVENUE
Contractor Name: Ames Construction
Contractor Address: 391 North Main Street, Suite 302, Corona, CA 92880
Resident Engineer: Denise Sostrom Structure Rep.: Matt Bruce
Sample Information
DIME Sample ID: 2023-03-14-19
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 03/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/07/2023
The quantity of what the sample constitutes: 4 Bags Of Agg., 2 Bags Of Rap
A brief description of the sample: JMA 3/4" HMA-A-SP R15 No LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0196A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt- Corona
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-33-0005
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 105927
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2023-03-14-19-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2023-03-14-19-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 04/07/2023 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
70885708867088770888708897089070891708927089370894
