Print Report | Back to Sample Detail

Sample Record for 2023-03-29-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993693 DEA: 010H7804 EFIS: 0118000106 QA Service Level: 1
DIST-CO-RTE-PM: 01-MEN-271-19.8
Work Description: Project Name: McCoy Creek Sinks/Slides (Description of Work: ROADWAY EXCAVATION, DRILLED HOLE AND STEEL SOLDIER PILE)
Location Description: MENDOCINO COUNTY NEAR PIERCY AT 0.3 MILE NORTH OF ROUTE 101/271 SEPARATION
Contractor Name: GRANITE CONSTRUCTION
Contractor Address: 4001 BRADSHAW ROAD, SACRAMENTO, CA 95827
Resident Engineer: Tai Morgan-Marbet Structure Rep.: Chris Brace

Sample Information

DIME Sample ID: 2023-03-29-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 03/29/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/03/2023
The quantity of what the sample constitutes: 31
A brief description of the sample: 1" X 10" X 10"
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): 22975-2
Material/Compound/Elastomer ID: NA
Samples Representing: 13
Description (size): 1" x 10" x 10"
Comments:
Description (Number of Shims): 2
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: NA
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-03-29-10-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 04/12/2023
Date Tested: 04/11/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: hardness
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 51
Reading #2 51
Reading #3 51
Reading #4 52
Reading #5 52
Mean 51.4

Test 2 of 4

DIME Test ID: 2023-03-29-10-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 04/12/2023
Date Tested: 04/10/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.07
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2627.45 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.068
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2660.52 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.071
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2568.82 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2627.5 lbf/in^2

Test 3 of 4

DIME Test ID: 2023-03-29-10-3
Test Method: ASTM D624-00r20: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 04/12/2023
Date Tested: 04/10/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.068
Sample 1 Tear Strength 236
Sample 2 Median Thickness 0.07
Sample 2 Tear Strength 243.7
Sample 3 Median Thickness 0.068
Sample 3 Tear Strength 226.3
Median of the Tear Strength Values 236 lb/in

Test 4 of 4

DIME Test ID: 2023-03-29-10-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 04/12/2023
Date Tested: 04/12/2023
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass