Print Report | Back to Sample Detail

Sample Record for 2022-09-07-103

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 22225 DEA: HMA-RSRCH EFIS: HMA-RSRCH QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: In-house research studies for FHWA on Asphalt Mixture Performance Tester (AMPT) and Cracking Tolerance Index of Asphalt Mixtures (IDEAL CT)
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-09-07-103
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Informational
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/07/2022
Date that the sample was received by the laboratory/organization performing the testing: 12/01/2022
The quantity of what the sample constitutes: 10 Boxes
A brief description of the sample: 3/4 RHMA-G
From where was the sample collected: Source
Laboratory sample identification: 023-003
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction -Ukiah

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-09-07-103-1
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
Data has not been verified.

Test 2 of 4

DIME Test ID: 2022-09-07-103-2
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
Data has not been verified.

Test 3 of 4

DIME Test ID: 2022-09-07-103-3
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
Data has not been verified.

Test 4 of 4

DIME Test ID: 2022-09-07-103-8
Test Method: ASTM D8360-22: Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test (Rutting Tolerance)
Verified Date: 04/04/2023
Date Tested: 02/02/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of specimens 3
Conditioning temperature 50.0 °C
HMA Source Plant Produced Mixture
Specimen preparation method SGC
Specimen air voids 6.9 %
Specimen air voids 2 6.6 %
Specimen air voids 3 6.7 %
Specimen thickness 0.0620 m
Specimen thickness 2 0.0620 m
Specimen thickness 3 0.0620 m
Specimen diameter 0.1500 m
Specimen diameter 2 0.1500 m
Specimen diameter 3 0.1500 m
Peak load 4810.0 N
Peak load 2 5400.0 N
Peak load 3 6010.0 N
Shear strength 1446006 Pa
Shear strength 2 1623374 Pa
Shear strength 3 1806756 Pa
Rutting tolerance index 95.7
Rutting tolerance index 2 107.4
Rutting tolerance index 3 119.6
Average rutting tolerance index 107.6

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2022-09-07-103-4ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature03/23/2023Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2022-09-07-103-5ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature03/23/2023Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2022-09-07-103-6ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature03/23/2023Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2022-09-07-103-7ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature03/23/2023Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory
2022-09-07-103-9ASTM D8360-22: Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test (Rutting Tolerance)04/20/2023Not scheduledGlenn BradleyCT HQ - Sacramento Hot Mix Asphalt Laboratory