Print Report | Back to Sample Detail

Sample Record for 2023-03-03-44

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994517 DEA: 043Y1404 EFIS: 0423000201 QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-12,29,121-var/var
Work Description:
Location Description:
Contractor Name: A. Teichert & Son, Inc.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-03-03-44
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 03/03/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/06/2023
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: 1/2 HMA-SP Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_211
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Vallejo

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-48-0002
The fabricator's/manufacturer's product name for the sample: 1/2 HMA-SP Type A
The fabricator/manufacturer designation for the sample: Drum Plant
The plant number: 87
A detailed description of where the material sample was collected: coldfeed
Where the material sample would have been placed if not sampled: Digouts
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: 320914
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2023-03-03-44-1
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 03/22/2023
Date Tested: 03/07/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 73

Test 2 of 2

DIME Test ID: 2023-03-03-44-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/22/2023
Date Tested: 03/07/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99 %
Cumulative percent passing the 3/8 in. sieve 80 %
Cumulative percent passing the #4 sieve 50 %
Cumulative percent passing the #8 sieve 32 %
Cumulative percent passing the #16 sieve 19 %
Cumulative percent passing the #30 sieve 12 %
Cumulative percent passing the #50 sieve 7 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 3.8 %