Print Report | Back to Sample Detail

Sample Record for 2023-02-21-63

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215677 DEA: 044G0804 EFIS: 0412000332 COOP: 042676 QA Service Level: 1
DIST-CO-RTE-PM: 04-SOL-80-R10.4/30.2
Work Description: Highway widening, overhead signs, and electronic toll system.
Location Description: In Solano County in Fairfield and Vacaville from 1.0 mile west of Red Top Road Undercrossing to 0.4 mile east of Leisure Town Road Overcrossing.
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: 1520 Fourth Street, Berkeley, CA 94710
Resident Engineer: Justen Tatum Structure Rep.: Kelsey Littell

Sample Information

DIME Sample ID: 2023-02-21-63
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 02/21/2023
Date that the sample was received by the laboratory/organization performing the testing: 02/21/2023
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4 HMA SP Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: C422-300
Structure unique identifier:
Structure name: HWY 80
The fabricator/manufacturer/facility name: Vulcan Vallejo

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 6
Sublot number: 1
HMA Mix Number: 411101510LD0221
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 3

Test Results

Test 1 of 3

DIME Test ID: 2023-02-21-63-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 03/22/2023
Date Tested: 02/24/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7372.9 grams
Mass of oven-dry sample in air for Sample 1 2636.4 grams
Mass of container filled with the sample and water for Sample 1 8957 grams
Mass of container filled with water 2 7372.9 grams
Mass of oven-dry sample in air for Sample 2 2681.5 grams
Mass of container filled with the sample and water for Sample 2 8985.6 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.505
Specific Gravity for Sample 2 2.509
Average Specific Gravity 2.507
Theoretical maximum density at 25°C (77°F) 2499.7 kg/m^3

Test 2 of 3

DIME Test ID: 2023-02-21-63-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 03/22/2023
Date Tested: 02/28/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.42
Bulk Specific Gravity 2 2.413
Bulk Specific Gravity 3 2.387
Average Bulk Specific Gravity 2.407

Test 3 of 3

DIME Test ID: 2023-02-21-63-3
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/22/2023
Date Tested: 02/27/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3144.7 g
Mass of the specimen and specimen basket assembly prior to ignition 5353.9 g
Mass of HMA Sample prior to ignition 2209.2 g
Corrected Asphalt Binder Content 5.74 %
Mass Loss 164.5 g
Mass of aggregate remaining after ignition 2044.7 g
Correction Factor (Percent by mass of HMA Specimen) 1.58 %
Moisture Content no data0 %
Temperature Compensation Factor 0.13 %
Test Temperature 900 F