Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214402 DEA: 010E7704 EFIS: 0115000009
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-R17.9/87.8
Work Description: STRENGTHEN 2 BRIDGES.
Location Description: HUMBOLDT COUNTY AT SOUTH FORK EEL RIVER AND SEPARATION AND AT ARCATA OVERHEAD
Contractor Name: Freyssinet Inc
Contractor Address: 44880 Falcon Place, Suite 100, Sterling, VA 20166
Resident Engineer: Joaquin Rodriguez Structure Rep.: Ryan Duran
DIME Sample ID: 2023-03-02-7
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 03/02/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/06/2023
The quantity of what the sample constitutes: 1
A brief description of the sample: HR Anchor Head
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Freyssinet
DIME Test ID: 2023-03-02-7-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/19/2023
Date Tested: 03/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
2
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | Y3909 | 0.247 | 0.04792 | 58064 | 101469 | 22.9 | spaine | | Y3909 | 0.25 | 0.04909 | 50738 | 99469 | 23.4 | spaine |
| |
UTM
|
67kip
|
Temperature
|
72 F
|
DIME Test ID: 2023-03-02-7-2
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 04/19/2023
Date Tested: 03/16/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon
|
0.453 %
|
Content, Si
|
0.226 %
|
Content, Mn
|
0.833 %
|
Content, P
|
0.0123 %
|
Content, S
|
0.0213 %
|
Content, Cr
|
0.0595 %
|
Content, Mo
|
0.0232 %
|
Content, Al
|
0.0314 %
|
Content, Co
|
0.0101 %
|
Content, Copper
|
0.259 %
|
Content, Nb
|
0.0031 %
|
Content, Ti
|
0.00087 %
|
Content, V
|
0.0037 %
|
Content, Lead
|
0.0173 %
|
Content, Boron
|
0.00082 %
|
Content, Fe
|
97.9 %
|
Content, Ni
|
0.0734 %
|
DIME Test ID: 2023-03-02-7-3
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 04/19/2023
Date Tested: 03/20/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon
|
0.43 %
|
Content, Si
|
0.22 %
|
Content, Mn
|
0.83 %
|
Content, P
|
0.013 %
|
Content, S
|
0.018 %
|
Content, Cr
|
0.058 %
|
Content, Mo
|
0.023 %
|
Content, Al
|
0.033 %
|
Content, Co
|
0.017 %
|
Content, Copper
|
0.24 %
|
Content, Nb
|
0.0029 %
|
Content, Ti
|
0.0013 %
|
Content, V
|
0.0034 %
|
Content, Lead
|
0.0175 %
|
Content, Boron
|
0.00080 %
|
Content, Fe
|
97.9 %
|
Content, Ni
|
0.071 %
|
DIME Test ID: 2023-03-02-7-4
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/19/2023
Date Tested: 03/17/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
0
|
Size
|
0 in
|
Bolt Length
|
0 in
|
Hardness Reading Scale
|
B Scale
|
Hardness Reading Average
|
91.6
|
Spacing
|
Ok
|