Sample Record for 2023-01-19-3
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 993788 DEA: 033F0724 EFIS: 0322000010
QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-51-2.5/3.3
Work Description: Procure steel girders
Location Description: District-County-Route-Post Mile: 03-Sac-51-2.5/3.3
Contractor Name: American River Constructors
Contractor Address: 4001 Bradshaw Road, Sacramento, CA 95827
Resident Engineer: John Ruzic Structure Rep.: Luis Guzman
Sample Information
DIME Sample ID: 2023-01-19-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 01/19/2023
Date that the sample was received by the laboratory/organization performing the testing: 01/24/2023
The quantity of what the sample constitutes: 952
A brief description of the sample: TC Fastener Assemblies
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: St. Louis Bolt
Material Information
Rocap Number(s):
Heat Number(s): 10755510
212523
X3721
Nut Mfg. Lot Number(s): 35669-212523
Washer Mfg. Lot Number(s): D9205
Bolt Specification: F1852
Bolt Length(s): 3"
Nut Specification: A563
Washer Specification: F436
Finish: Mech Galv
Diameter/Size: 7/8-9 x 3
Bolt Mfg. Lot Number: 36685-10755510
Rocap Test Requirement(s): Yes
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test Results
Test 1 of 32
DIME Test ID: 2023-01-19-3-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 01/27/2023
Date Tested: 01/26/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 36685-10755510 | 0.8750 | 69061 | 307.2 | 10.00 | A325 Wedge Tensile | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 2 of 32
DIME Test ID: 2023-01-19-3-2
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 01/27/2023
Date Tested: 01/26/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1B | 36685-10755510 | 0.8750 | 69813 | 310.54 | 10.00 | A325 Wedge Tensile | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 3 of 32
DIME Test ID: 2023-01-19-3-3
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 01/27/2023
Date Tested: 01/26/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | | | 72574 | | Nut Proof Load | |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 4 of 32
DIME Test ID: 2023-01-19-3-4
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 01/27/2023
Date Tested: 01/26/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1B | | | 72620 | | Nut Proof Load | |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 5 of 32
DIME Test ID: 2023-01-19-3-5
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 6 of 32
DIME Test ID: 2023-01-19-3-6
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 7 of 32
DIME Test ID: 2023-01-19-3-7
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 8 of 32
DIME Test ID: 2023-01-19-3-8
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 9 of 32
DIME Test ID: 2023-01-19-3-9
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 10 of 32
DIME Test ID: 2023-01-19-3-10
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 11 of 32
DIME Test ID: 2023-01-19-3-11
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 12 of 32
DIME Test ID: 2023-01-19-3-12
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 13 of 32
DIME Test ID: 2023-01-19-3-13
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 14 of 32
DIME Test ID: 2023-01-19-3-14
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Gage Type
|
NA
|
Test 15 of 32
DIME Test ID: 2023-01-19-3-15
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Measurement Average
|
2.12 mils
|
Test 16 of 32
DIME Test ID: 2023-01-19-3-16
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Measurement Average
|
2.23 mils
|
Test 17 of 32
DIME Test ID: 2023-01-19-3-17
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Measurement Average
|
2.75 mils
|
Test 18 of 32
DIME Test ID: 2023-01-19-3-18
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Measurement Average
|
2.17 mils
|
Test 19 of 32
DIME Test ID: 2023-01-19-3-19
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
36685-10755510
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325TC USA
|
|
Size
|
.875 in
|
|
Bolt Length
|
3 in
|
|
Measurement Average
|
2.13 mils
|
Test 20 of 32
DIME Test ID: 2023-01-19-3-20
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
2.75 mils
|
Test 21 of 32
DIME Test ID: 2023-01-19-3-21
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.49 mils
|
Test 22 of 32
DIME Test ID: 2023-01-19-3-22
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.15 mils
|
Test 23 of 32
DIME Test ID: 2023-01-19-3-23
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.03 mils
|
Test 24 of 32
DIME Test ID: 2023-01-19-3-24
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
35669-212523
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
DH U
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.25 mils
|
Test 25 of 32
DIME Test ID: 2023-01-19-3-25
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.62 mils
|
Test 26 of 32
DIME Test ID: 2023-01-19-3-26
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.56 mils
|
Test 27 of 32
DIME Test ID: 2023-01-19-3-27
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.63 mils
|
Test 28 of 32
DIME Test ID: 2023-01-19-3-28
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.85 mils
|
Test 29 of 32
DIME Test ID: 2023-01-19-3-29
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.62 mils
|
Test 30 of 32
DIME Test ID: 2023-01-19-3-30
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.3
|
|
Spacing
|
Ok
|
Test 31 of 32
DIME Test ID: 2023-01-19-3-31
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.53
|
|
Spacing
|
Ok
|
Test 32 of 32
DIME Test ID: 2023-01-19-3-32
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 01/27/2023
Date Tested: 01/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D9205
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
F436 P
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.53
|
|
Spacing
|
Ok
|
