Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993287 DEA: 112T35U4 EFIS: 1121000195
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5-R37.4/R52.6
Work Description: CMSTPL-6211(148) I-5 N Coast Corridor HOV Extension Carlsbad
Location Description: IN SAN DIEGO COUNTY AT VARIOUS LOCATIONS FROM LOMAS SANTA FE DRIVE UNDERCROSSING TO 0.2 MILES NORTH OF OCEANSIDE BOULEVARD UNDERCROSSING
Contractor Name: Flatironcorp
Contractor Address: 1525 Faraday Avenue, Suite 180, Carlsbad, CA 92008
Resident Engineer: Steve McMillan Structure Rep.: Rafael Lopez
DIME Sample ID: 2022-10-29-9
TL Number from the TL Form:
Sample Submitted By Organization: Sequoia Consultants
Sample Organization Contact: (714) 974-6316
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 10/29/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/30/2022
The quantity of what the sample constitutes: 2 cylinders
A brief description of the sample: Structural Concrete
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cal portland
The concrete mix design number: 0038621
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 105546
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: SB Approach Departure SB AHL Approach Departure SB Chestnu
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
DIME Test ID: 2022-10-29-9-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 12/16/2022
Date Tested: 12/10/2022
Submitted By Organization: Sequoia Consultants
Organization Address: 361 West Grove Avenue,
Organization City: Orange
Organization State: CA
Organization Zipcode: 92865
Organization Email: sranjan@sequoiacon.com
Organization Phone: 1 (714) 974-6316
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used?
|
US Units
|
Number of specimens
|
2
|
Test performed
|
With no density determined
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
Average diameter of cylinder 1
|
6.00 in
|
Average diameter of cylinder 2
|
6.00 in
|
Cross sectional area of cylinder 1
|
28.27 in^2
|
Cross sectional area of cylinder 2
|
28.27 in^2
|
Compressive strength (to nearest 10 psi)
|
4660 psi
|
Maximum load on cylinder 1
|
134810 lb
|
Maximum load on cylinder 2
|
128700 lb
|
Type of fracture pattern of cylinder 1
|
3
|
Type of fracture pattern of cylinder 2
|
4
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Correction factor for cylinder 1
|
1
|
Correction factor for cylinder 2
|
1
|
Age of specimen
|
42 days
|
Age of specimen in hours
|
0 hours
|