Print Report | Back to Sample Detail

Sample Record for 2022-09-01-74

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for storing JMF sample data
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-09-01-74
TL Number from the TL Form:
Sample Submitted By Organization: Sierra Pacific Materials
Sample Organization Contact: (805) 423-2327
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/01/2022
Date that the sample was received by the laboratory/organization performing the testing: 09/01/2022
The quantity of what the sample constitutes: JMF
A brief description of the sample: 1/2" HMA
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM Avenal

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-09-01-74-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/07/2022
Date Tested: 09/01/2022
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: Submitted from JMF - Michael Davis
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 5.20 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test 2 of 4

DIME Test ID: 2022-09-01-74-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 12/07/2022
Date Tested: 09/01/2022
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: Submitted from JMF - Michael Davis
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.332
Bulk Specific Gravity 2 2.333
Bulk Specific Gravity 3 2.331
Average Bulk Specific Gravity 2.332

Test 3 of 4

DIME Test ID: 2022-09-01-74-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/07/2022
Date Tested: 09/01/2022
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: Submitted from JMF - Michael Davis
Test Result Compliance:
Additional Comments When Verified:
Number of tests 3
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Specific Gravity for Sample 1 no data
Specific Gravity for Sample 2 no data
Specific Gravity for Sample 3 no data
Average Specific Gravity 2.430
Theoretical maximum density at 25°C (77°F) no data

Test 4 of 4

DIME Test ID: 2022-09-01-74-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 12/07/2022
Date Tested: 09/01/2022
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: Submitted from JMF - Michael Davis
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.0 %
Percent Air Voids 2 4.0 %
Percent Air Voids 3 4.1 %
Percent Air Voids Average 4.0 %