Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 88887 DEA: PC-Barrier-STOCK EFIS: PC-Barrier-STOCK
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for precast barrier rail stock material.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-09-23-58
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/23/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/24/2022
The quantity of what the sample constitutes: 378
A brief description of the sample: A325 HDG Bolt
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Solid Steel
Rocap Number(s):
Heat Number(s): 220c778
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: 1.5-6X4.25 HDG
Bolt Length(s): 4.25
Nut Specification: NA
Washer Specification: NA
Finish: HDG
Diameter/Size: 1.5
Bolt Mfg. Lot Number: 57486
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
DIME Test ID: 2022-09-23-58-1
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2022-09-23-58-2
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2022-09-23-58-3
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2022-09-23-58-4
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2022-09-23-58-5
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2022-09-23-58-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Measurement Average
|
3.61 mils
|
DIME Test ID: 2022-09-23-58-7
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Measurement Average
|
2.85 mils
|
DIME Test ID: 2022-09-23-58-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Measurement Average
|
4.32 mils
|
DIME Test ID: 2022-09-23-58-9
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Measurement Average
|
4.22 mils
|
DIME Test ID: 2022-09-23-58-10
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Measurement Average
|
3.47 mils
|
DIME Test ID: 2022-09-23-58-11
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.63
|
|
Spacing
|
Ok
|
DIME Test ID: 2022-09-23-58-12
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.27
|
|
Spacing
|
Ok
|
DIME Test ID: 2022-09-23-58-13
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/25/2022
Date Tested: 10/25/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
57486
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
FF A-325
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.25 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.67
|
|
Spacing
|
Ok
|
