Print Report | Back to Sample Detail

Sample Record for 2022-10-10-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993490 DEA: 051M4604 EFIS: 0519000154 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-1-44.5
Work Description: CONSTRUCT RETAINING WALL, WIDENING SHOULDER AND PLACE HMA. Highway 1 at Coastlands Rd Soldier Pile Wall.
Location Description: MONTEREY COUNTY NEAR BIG SUR AT 1.0 MILE SOUTH OF PFEIFFER CANYON BRIDGE
Contractor Name: FEC Future Contractors & Engineers, Inc
Contractor Address: 184 Technology Dr., Ste 2, Irvine, CA 92618
Resident Engineer: Arashdeep Pannu Structure Rep.: Alex Naime

Sample Information

DIME Sample ID: 2022-10-10-2
TL Number from the TL Form: na
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 10/10/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/10/2022
The quantity of what the sample constitutes: 22
A brief description of the sample: 1/2" x 3-1/2" A449 Carriage Bolts
From where was the sample collected: Fabricator
Laboratory sample identification: na
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales, Inc.

Material Information

Rocap Number(s): na
Heat Number(s): 20815170
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: A449
Bolt Length(s): 3-1/2"
Nut Specification: na
Washer Specification: na
Finish: HDG
Diameter/Size: 1/2"
Bolt Mfg. Lot Number: 58498
Rocap Test Requirement(s): na
Lubricant Requirements(s): na
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2022-10-10-2-1
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Gage Type Pass

Test 2 of 8

DIME Test ID: 2022-10-10-2-2
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Gage Type Pass

Test 3 of 8

DIME Test ID: 2022-10-10-2-3
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Gage Type Pass

Test 4 of 8

DIME Test ID: 2022-10-10-2-4
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Gage Type Pass

Test 5 of 8

DIME Test ID: 2022-10-10-2-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Measurement Average 5.52 mils

Test 6 of 8

DIME Test ID: 2022-10-10-2-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Measurement Average 4.58 mils

Test 7 of 8

DIME Test ID: 2022-10-10-2-7
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Measurement Average 5.5 mils

Test 8 of 8

DIME Test ID: 2022-10-10-2-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/24/2022
Date Tested: 10/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 20815170
Mfg. Lot Number B390-220-22
Finish Coating ASTM F2329 - Hot Dip
Product Markings A449 G
Size .5 in
Bolt Length 3.5 in
Measurement Average 4.4 mils