Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993609 DEA: 09388804 EFIS: 0921000038
QA Service Level: 1
DIST-CO-RTE-PM: 09-KER-58-R123.0/R125.3
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA-G.
Location Description: IN KERN COUNTY ABOUT 10 MILES EAST OF MOJAVE FROM 4.6 MILES TO 2.3 MILES WEST OF CALIFORNIA CITY BOULEVARD
Contractor Name: GRIFFITH COMPANY
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-08-18-90
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/18/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/03/2022
The quantity of what the sample constitutes: 4 Boxes RHMA, 1 Qt Rubber Blend 1511.46 tons out
A brief description of the sample: 1/2" RHMA-G 1.0% LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 0670G-22
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston Lebec
DIME Test ID: 2022-08-18-90-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/05/2022
Date Tested: 10/04/2022
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
no data
|
|
Mass of HMA Sample prior to ignition
|
no data
|
|
Corrected Asphalt Binder Content
|
7.18 %
|
|
Mass Loss
|
no data
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
|
Moisture Content
|
no data
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
no data
|