Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993603 DEA: 051N7004 EFIS: 0521000081
QA Service Level: 1
DIST-CO-RTE-PM: 05-SLO-166-16.0/21.0
Work Description: PARTIAL DEPTH RECYCLING AND OVERLAY WITH RHMA (GAP GRADED).
Location Description: SAN LUIS OBISPO COUNTY ABOUT 8 MILES EAST OF SANTA MARIA FROM 0.5 MILE WEST OF HUASNA RIVER BRIDGE TO 1.9 MILES WEST OF CUYAMA RIVER BRIDGE.
Contractor Name: PAPICH CONSTRUCTION COMPANY INC.
Contractor Address: Unknown
Resident Engineer: Thomas Petersen Structure Rep.: Unknown
DIME Sample ID: 2022-08-24-26
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Sample Organization Contact:
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/24/2022
Date that the sample was received by the laboratory/organization performing the testing: 08/24/2022
The quantity of what the sample constitutes: L1SL5
A brief description of the sample: 3/4" RHMA-G
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Papich Templeton
DIME Test ID: 2022-08-24-26-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/02/2022
Date Tested: 08/24/2022
Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Organization Address: 2053 Preisker Lane, Suite E,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93427
Organization Email: salvador.lopez-zamora@dot.ca.gov
Organization Phone: (805) 748-3854
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Water
|
|
Specific Gravity for Sample 1
|
2.376
|
|
Theoretical maximum density at 25°C (77°F)
|
148.3 lb/ft^3
|
DIME Test ID: 2022-08-24-26-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/02/2022
Date Tested: 08/25/2022
Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Organization Address: 2053 Preisker Lane, Suite E,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93427
Organization Email: salvador.lopez-zamora@dot.ca.gov
Organization Phone: (805) 748-3854
General Comments for this Test: Complies
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.225
|
|
Bulk Specific Gravity 2
|
2.241
|
|
Bulk Specific Gravity 3
|
2.213
|
|
Average Bulk Specific Gravity
|
2.226
|
