Print Report | Back to Sample Detail

Sample Record for 2022-07-11-87

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for storing JMF sample data
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-07-11-87
TL Number from the TL Form:
Sample Submitted By Organization: Pyramid Construction and Aggregates
Sample Organization Contact: (760) 337-5839
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/11/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/11/2022
The quantity of what the sample constitutes: OBC
A brief description of the sample: Mix Testing
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: G3 Quality, Inc.

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-07-11-87-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/23/2022
Date Tested: 08/23/2022
Submitted By Organization: Pyramid Construction and Aggregates
Organization Address: 839 Dogwood Road,
Organization City: Heber
Organization State: CA
Organization Zipcode: 92249
Organization Email: archie@pyramidca.com
Organization Phone: (760) 337-5839
General Comments for this Test: Submitted from JMF - Archie Abeyta
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 5.00 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test 2 of 4

DIME Test ID: 2022-07-11-87-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/23/2022
Date Tested: 08/23/2022
Submitted By Organization: Pyramid Construction and Aggregates
Organization Address: 839 Dogwood Road,
Organization City: Heber
Organization State: CA
Organization Zipcode: 92249
Organization Email: archie@pyramidca.com
Organization Phone: (760) 337-5839
General Comments for this Test: Submitted from JMF - Archie Abeyta
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.390
Bulk Specific Gravity 2 2.389
Bulk Specific Gravity 3 2.389
Average Bulk Specific Gravity 2.389

Test 3 of 4

DIME Test ID: 2022-07-11-87-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/23/2022
Date Tested: 08/23/2022
Submitted By Organization: Pyramid Construction and Aggregates
Organization Address: 839 Dogwood Road,
Organization City: Heber
Organization State: CA
Organization Zipcode: 92249
Organization Email: archie@pyramidca.com
Organization Phone: (760) 337-5839
General Comments for this Test: Submitted from JMF - Archie Abeyta
Test Result Compliance:
Additional Comments When Verified:
Number of tests 3
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Specific Gravity for Sample 1 2.490
Specific Gravity for Sample 2 no data
Specific Gravity for Sample 3 no data
Average Specific Gravity 2.490
Theoretical maximum density at 25°C (77°F) no data

Test 4 of 4

DIME Test ID: 2022-07-11-87-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/23/2022
Date Tested: 08/23/2022
Submitted By Organization: Pyramid Construction and Aggregates
Organization Address: 839 Dogwood Road,
Organization City: Heber
Organization State: CA
Organization Zipcode: 92249
Organization Email: archie@pyramidca.com
Organization Phone: (760) 337-5839
General Comments for this Test: Submitted from JMF - Archie Abeyta
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.0 %
Percent Air Voids 2 4.1 %
Percent Air Voids 3 4.1 %
Percent Air Voids Average 4.1 %