Print Report | Back to Sample Detail

Sample Record for 2022-08-08-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993649 DEA: 081M0304 EFIS: 0821000062 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-177-0.0/27.0
Work Description: PLACE RUBBERIZED HMA, TRAFFIC STRIPING & COLD PLANE ASPHALT CONCRETE.
Location Description: RIVERSIDE COUNTY NEAR DESERT CENTER FROM ROUTE 10/177 SEPARATION TO ROUTE 62
Contractor Name: Martin Marietta -ATP General Engineering Construction
Contractor Address: 4211 Ponderosa Ave. Suite C, San Diego, CA 92123
Resident Engineer: Peter Koury Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-08-08-10
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 08/08/2022
Date that the sample was received by the laboratory/organization performing the testing: 08/09/2022
The quantity of what the sample constitutes: 8 Bags Bin Agg., 2 Bags Rap 1 Bag Mineral Agg.,
A brief description of the sample: 3/4" HMA-A-SP R24 0.4% Evo
From where was the sample collected: Manufacturer
Laboratory sample identification: 0531A-22
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta -Coachella

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-33-0084
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number: 43417105
A detailed description of where the material sample was collected: Belt Cut ay Martin Marietta -Coachella
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2022-08-08-10-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2022-08-08-10-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates08/09/2022Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory