Print Report | Back to Sample Detail

Sample Record for 2022-07-17-8

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993612 DEA: 112N1184 EFIS: 1121000147 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-78-60.3/66.4
Work Description: COLD PLANE, RHMA-G OVERLAY, SHOULDER BACKING AND STRIPING.
Location Description: SAN DIEGO COUNTY NEAR JULIAN FROM WYNOLA ROAD TO 3.5 MILES WEST OF SAN FELIPE CREEK
Contractor Name: HANSON AGGREGATES PACIFIC SOUTHWEST LLC. DBA ATP GENERAL ENGINEERING CONTRAC
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-07-17-8
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/17/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/18/2022
The quantity of what the sample constitutes: 12 boxes, 6 bags, 3 cans
A brief description of the sample: 1.5" HMA-A
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan CC

Material Information

HMA Type: Type A HMA
HMA Grading: 1 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-07-17-8-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 11/02/2022
Date Tested: 07/21/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed no data
Mass of container filled with water 10193.5 grams
Mass of oven-dry sample in air for Sample 1 4014.7 grams
Mass of container filled with the sample and water for Sample 1 12627.6 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.54
Theoretical maximum density at 25°C (77°F) 158.1 lb/ft^3