Print Report | Back to Sample Detail

Sample Record for 2022-06-06-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993445 DEA: 101M3504 EFIS: 1020000181 QA Service Level: 1
DIST-CO-RTE-PM: 10-SJ-132-L0.7/5.8
Work Description: REPLACE APPROACH SLAB AND PLACE POLYESTER CONCRETE OVERLAY.
Location Description: SAN JOAQUIN COUNTY NEAR VERNALIS AT VARIOUS LOCATIONS FROM ROUTE 132 EAST/580 SEPARATION TO ROUTE 132/33 SEPARATION AND OVERHEAD
Contractor Name: Truesdell Corporation
Contractor Address: 1310 W. 23rd Street, Tempe, AZ 85282
Resident Engineer: David Abledu Structure Rep.: Kyle Sanford

Sample Information

DIME Sample ID: 2022-06-06-57
TL Number from the TL Form: C001
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 206-4373
Type of Sample: Quality Assurance
Type of Material: Rapid Set
Sample Taken Date: 06/06/2022
Date that the sample was received by the laboratory/organization performing the testing: 06/09/2022
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: Rapid Setting Mortar
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sika - Santa Fe Springs

Material Information

Manufacturer: Sika Corporation
Mix no.: 01
Materials Received: 06/06/2022
Lot no.: 3006344957
Batch no.: 06062201
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-06-06-57-1
Test Method: CONCLP 2-16: Rapid Set Patching Materials
Verified Date: 07/08/2022
Date Tested: 06/21/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Compressive Strength @ 3 hrs (CTM 551) 4710
Compressive Strength @ 24 hrs (CTM 551) 5920
Flexure Strength @ 24 hrs (CTM 551) no data0 psi
Bond Strength @ 24 hrs - SSD (CTM 551) no data0 psi
Bond Strength @ 24 hrs - Dry (CTM 551) no data0 psi
Water Absorption (CTM 551) no data0 %
Abrasion @ 24 hrs (CTM 550) 21
Drying Shrinkage @ 4 days (CTM 596) no data0 %
Soluble Chlorides (CTM 422) 0.0006
Water Soluble-Sulfates (CTM 417) 0.006
Material Weight 50
Water Weight 5.7