Print Report | Back to Sample Detail

Sample Record for 2022-05-18-40

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215315 DEA: 081H8304 EFIS: 0817000139 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD,SBD-138-0/2.3
Work Description: CONSTRUCT 4' MEDIAN
Location Description: SAN BERNARDINO COUNTY ALONG ROUTE 138
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 213 E Columbia Way, Lancaster, CA 93552
Resident Engineer: Mauricio Santa Cruz Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-05-18-40
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/18/2022
Date that the sample was received by the laboratory/organization performing the testing: 05/24/2022
The quantity of what the sample constitutes: 2 Boxes HMA 875.33 tons out
A brief description of the sample: 3/4" HMA-A-SP R25 1.0% LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 0307A-22
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Big Rock

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 5
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2022-05-18-40-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/31/2022
Date Tested: 05/25/2022
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 4.21 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data