Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993150 DEA: 051G9704 EFIS: 0516000008
QA Service Level: 1
DIST-CO-RTE-PM: 05-SB-135-11.7/17.8
Work Description: COLD PLANE, OVERLAY ROADWAY WITH RHMA (GAP GRADED) AND ADA CURB RAMPS.
Location Description: SANTA BARBARA COUNTY IN AND NEAR SANTA MARIA FROM LAKEVIEW ROAD TO NORTH SANTA MARIA CONNECTOR
Contractor Name: CAL PORTLAND CONSTRUCTION
Contractor Address: 1625 E. Donovan, Santa Maria, Ca 93454
Resident Engineer: Thomas Petersen Structure Rep.: Unknown
DIME Sample ID: 2022-05-03-45
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Sample Organization Contact:
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/03/2022
Date that the sample was received by the laboratory/organization performing the testing: 05/04/2022
The quantity of what the sample constitutes: L1SL8
A brief description of the sample: 1/2" RHMA-G
From where was the sample collected: Job Site
Laboratory sample identification: L1SL8
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Calportland-Garey
DIME Test ID: 2022-05-03-45-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/23/2022
Date Tested: 05/04/2022
Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Organization Address: 2053 Preisker Lane, Suite E,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93427
Organization Email: salvador.lopez-zamora@dot.ca.gov
Organization Phone: (805) 748-3854
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Specific Gravity for Sample 1
|
2.325
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
DIME Test ID: 2022-05-03-45-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/23/2022
Date Tested: 05/03/2022
Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Organization Address: 2053 Preisker Lane, Suite E,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93427
Organization Email: salvador.lopez-zamora@dot.ca.gov
Organization Phone: (805) 748-3854
General Comments for this Test: 3/8" below minimum operating range
Test Result Compliance: does not comply
Additional Comments When Verified:
What type of gradation is being tested?
|
HMA Gradation
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
94 %
|
Cumulative percent passing the 3/8 in. sieve
|
77.4 %
|
Cumulative percent passing the #4 sieve
|
33.3 %
|
Cumulative percent passing the #8 sieve
|
62.8 %
|
Cumulative percent passing the #16 sieve
|
50.4 %
|
Cumulative percent passing the #30 sieve
|
38.7 %
|
Cumulative percent passing the #50 sieve
|
24.6 %
|
Cumulative percent passing the #100 sieve
|
14.1 %
|
Cumulative percent passing the #200 sieve
|
8.9 %
|
DIME Test ID: 2022-05-03-45-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/24/2022
Date Tested: 05/05/2022
Submitted By Organization: CT D05 - Santa Maria Field Laboratory
Organization Address: 2053 Preisker Lane, Suite E,
Organization City: Santa Maria
Organization State: CA
Organization Zipcode: 93427
Organization Email: salvador.lopez-zamora@dot.ca.gov
Organization Phone: (805) 748-3854
General Comments for this Test: no 3rd test
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity
|
2.161
|
Bulk Specific Gravity 2
|
2.183
|
Bulk Specific Gravity 3
|
0.000
|
Average Bulk Specific Gravity
|
2.172
|