Print Report | Back to Sample Detail

Sample Record for 2022-04-24-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215370 DEA: 11427504 EFIS: 1116000177 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD,IMP-5,7,111,186,188etc-VAR
Work Description: INSTALL FIBER OPTIC CABLE AND POINT VEHICLE DETECTION FIELD ELEMENTS.
Location Description: SAN DIEGO AND IMPERIAL COUNTIES AT VARIOUS LOCATIONS
Contractor Name: HMS Construction Inc. (Att: Jeff Summer)
Contractor Address: 1047 La Mirada Court, Vista CA 92081
Resident Engineer: Victor Cardenas Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-04-24-1
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/24/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/25/2022
The quantity of what the sample constitutes: 12 boxes, 2 bags, 4 cans
A brief description of the sample: 1/2" JMF Renewal
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Otay

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-04-24-1-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/29/2024
Date Tested: 04/26/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: 5601-JMF 11-427504
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly no data
Mass of the specimen and specimen basket assembly prior to ignition no data
Mass of HMA Sample prior to ignition 1535.3 g
Corrected Asphalt Binder Content 7.66 %
Mass Loss no data
Mass of aggregate remaining after ignition 1405.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.78 %
Moisture Content no data0 %
Temperature Compensation Factor no data
Test Temperature 1000 F

Test 2 of 4

DIME Test ID: 2022-04-24-1-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/29/2024
Date Tested: 04/26/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: 5601-JMF 11-427504
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Specific Gravity for Sample 1 2.42
Theoretical maximum density at 25°C (77°F) no data

Test 3 of 4

DIME Test ID: 2022-04-24-1-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/29/2024
Date Tested: 04/26/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: 5601-JMF 11-427504
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.377
Bulk Specific Gravity 2 2.38
Bulk Specific Gravity 3 2.381
Average Bulk Specific Gravity 2.379

Test 4 of 4

DIME Test ID: 2022-04-24-1-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/29/2024
Date Tested: 04/26/2022
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: 5601-JMF 11-427504
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 1.8 %
Percent Air Voids 2 1.7
Percent Air Voids 3 1.6
Average Percent Air Voids 1.7

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2022-04-24-1-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)04/25/202205/04/2022Melchor OronozCT D11 - District 11 Materials LaboratoryShawn Lynn
2022-04-24-1-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt04/25/202205/06/2022Melchor OronozCT D11 - District 11 Materials LaboratoryShawn Lynn