Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214573 DEA: 073096U4 EFIS: 0719000091
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-210-R0.0/R9.7
Work Description: PLACE CONCRETE PAVEMENT, BARRIER, HMA, DRAINAGE, AND ELECTRICAL.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES FROM INTERSTATE 5 TO WHEATLAND AVENUE UNDERCROSSING
Contractor Name: FLATIRON WEST INC
Contractor Address: 15335 FAIRFIELD RANCH ROAD, CHINO HILLS, CA 91709
Resident Engineer: Ridwan Salman Structure Rep.: Adriana Pimienta
DIME Sample ID: 2022-04-15-23
TL Number from the TL Form:
Sample Submitted By Organization: Kleinfelder, Incorporated - Los Angeles
Sample Organization Contact: (909) 833-5780
Type of Sample: Quality Assurance
Type of Material: Soil
Sample Taken Date: 04/15/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/15/2022
The quantity of what the sample constitutes: 15,526 Sq. Ft.
A brief description of the sample: Existing Subgrade
From where was the sample collected: Job Site
Laboratory sample identification: 22-0826
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Existing Subgrade
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: In-placed material
Where the material sample would have been placed if not sampled:
DIME Test ID: 2022-04-15-23-1
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 04/18/2022
Date Tested: 04/15/2022
Submitted By Organization: Kleinfelder, Incorporated - Los Angeles
Organization Address: 620 South Magnolia Avenue, Building G,
Organization City: Ontario
Organization State: CA
Organization Zipcode: 91762
Organization Email: mdorsch@kleinfelder.com
Organization Phone: (909) 833-5780
General Comments for this Test: In-place wet density of 2.18 vs maximum wet density of 2.24.
Test Result Compliance:
Additional Comments When Verified:
Is oversize material
|
No
|
In-place wet density
|
2.18
|
Highest adjust wet density
|
2.24
|
Relative compaction
|
97
|
% Moisture
|
10.1 %
|
Optimum Moisture
|
12.1 %
|