Print Report | Back to Sample Detail

Sample Record for 2022-03-02-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-03-02-57
TL Number from the TL Form:
Sample Submitted By Organization: Dutra Materials
Sample Organization Contact: (415) 847-8087
Type of Sample: Quality Control
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 03/02/2022
Date that the sample was received by the laboratory/organization performing the testing: 03/02/2022
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Materials Richmond

Material Information

RAP Source: Stockpile
Aggregate Size: 1/2-inch
Aggregate Source:
RAP Stockpile: Static
Stockpile Size (tons): 3000
Reclaimed Asphalt Pavement Mix Number:
Test results on following page(s): 2

Test Results

Test

DIME Test ID: 2022-03-02-57-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 6.84 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test

DIME Test ID: 2022-03-02-57-2
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is an aggregate correction factor used? No
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 97.7 %
Cumulative percent passing the #4 sieve 80.8 %
Cumulative percent passing the #8 sieve 63.1 %
Cumulative percent passing the #16 sieve 48.1 %
Cumulative percent passing the #30 sieve 36.4 %
Cumulative percent passing the #50 sieve 24.7 %
Cumulative percent passing the #100 sieve 14.1 %
Cumulative percent passing the #200 sieve 8.9 %