Print Report | Back to Sample Detail

Sample Record for 2022-03-02-56

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-03-02-56
TL Number from the TL Form:
Sample Submitted By Organization: Dutra Materials
Sample Organization Contact: (415) 847-8087
Type of Sample: Quality Control
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 03/02/2022
Date that the sample was received by the laboratory/organization performing the testing: 03/02/2022
The quantity of what the sample constitutes: 2 bags
A brief description of the sample: RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Materials Richmond

Material Information

RAP Source: Stockpile
Aggregate Size: 1/2-inch
Aggregate Source:
RAP Stockpile: Static
Stockpile Size (tons): 3000
Reclaimed Asphalt Pavement Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2022-03-02-56-1
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is an aggregate correction factor used? No
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 98 %
Cumulative percent passing the #4 sieve 77 %
Cumulative percent passing the #8 sieve 57.3 %
Cumulative percent passing the #16 sieve 42.6 %
Cumulative percent passing the #30 sieve 32.4 %
Cumulative percent passing the #50 sieve 22.9 %
Cumulative percent passing the #100 sieve 14 %
Cumulative percent passing the #200 sieve 9.3 %

Test 2 of 2

DIME Test ID: 2022-03-02-56-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/01/2022
Date Tested: 03/02/2022
Submitted By Organization: Dutra Materials
Organization Address: 1000 Point San Pedro Road,
Organization City: San Rafael
Organization State: CA
Organization Zipcode: 94901
Organization Email: mjames@dutragroup.com
Organization Phone: (415) 847-8087
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 6.33 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data