Sample Record for 2022-03-29-8
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 215692 DEA: 101C8104 EFIS: 1015000038
QA Service Level: 1
DIST-CO-RTE-PM: 01-MPA,MER,SJ,STA-4,5,49,88,99,etc.-Var
Work Description: BRIDGE PREVENTIVE MAINTENANCE AND ROCK SLOPE PROTECTION.
Location Description: MARIPOSA, MERCED, SAN JOAQUIN, AND STANISLAUS COUNTIES AT VARIOUS LOCATIONS
Contractor Name: Pacific Infrastructure Construction LLC.
Contractor Address: 871 Cotting Court, Suite A,, Vacaville CA 95688
Resident Engineer: Harminder Deol (Ryan Wilson) Structure Rep.: George Samuel
Sample Information
DIME Sample ID: 2022-03-29-8
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/29/2022
Date that the sample was received by the laboratory/organization performing the testing: 04/06/2022
The quantity of what the sample constitutes: 25
A brief description of the sample: A325 bolts, Nuts and Washers
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tru-fit Products of Utah
Material Information
Rocap Number(s): 2022-3-02
Heat Number(s): NF11203578
Nut Mfg. Lot Number(s): 464690A
Washer Mfg. Lot Number(s): 0720-528
Bolt Specification: ASTM A325
Bolt Length(s): 3"
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: Plain
Diameter/Size: 5/8"
Bolt Mfg. Lot Number: 298259A
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 5
DIME Test ID: 2022-03-29-8-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 04/21/2022
Date Tested: 04/19/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 298259A | 0.6250 | 33202 | 147.69 | 10.00 | A325 Wedge Tensile | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 2 of 5
DIME Test ID: 2022-03-29-8-2
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 04/21/2022
Date Tested: 04/19/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 464690A | | 41518 | | Nut Proof Load | spaine |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 3 of 5
DIME Test ID: 2022-03-29-8-3
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
298259A
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
A325 N
|
|
Size
|
.625 in
|
|
Bolt Length
|
3 in
|
|
Gage Type
|
Pass
|
Test 4 of 5
DIME Test ID: 2022-03-29-8-4
Test Method: ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
464690A
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH N
|
|
Size
|
.625 in
|
|
Gage Type
|
Pass
|
Test 5 of 5
DIME Test ID: 2022-03-29-8-5
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/21/2022
Date Tested: 04/20/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
0720-528
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
F436 TSI
|
|
Size
|
.625 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.55
|
|
Spacing
|
Ok
|
