Print Report | Back to Sample Detail

Sample Record for 2022-01-07-37

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 44444 DEA: ASCP EFIS: ASCP QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-01-07-37
TL Number from the TL Form:
Sample Submitted By Organization: Ergon Asphalt & Emulsions
Sample Organization Contact: (702) 736-2059
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 01/07/2022
Date that the sample was received by the laboratory/organization performing the testing: 01/07/2022
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: Blender
From where was the sample collected: Manufacturer
Laboratory sample identification: Z3227695
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Las Vegas, NV

Material Information

Performance Grade: PG 70-10
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Ergon Asphalt & Emulsions
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:

Test Results

Test 1 of 18

DIME Test ID: 2022-01-07-37-1
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-12
Reason: corrected

Test 2 of 18

DIME Test ID: 2022-01-07-37-2
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-13
Reason: corrected

Test 3 of 18

DIME Test ID: 2022-01-07-37-3
Test Method: AASHTO T44-18: Standard Method of Test for Solubility of Bituminous Materials
Verified Date: 01/31/2022
Date Tested: 01/03/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Was test performed on residue from distillation or evaporation? Evaporation
Soluble, percent 99.9 %
Insoluble, percent 0.1 %

Test 4 of 18

DIME Test ID: 2022-01-07-37-4
Test Method: AASHTO T48-18: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-14
Reason: retested

Test 5 of 18

DIME Test ID: 2022-01-07-37-5
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-15
Reason: retested

Test 6 of 18

DIME Test ID: 2022-01-07-37-6
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 01/31/2022
Date Tested: 01/10/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Is mass change based on one or two containers? One
Average mass change -0.138 percent

Test 7 of 18

DIME Test ID: 2022-01-07-37-7
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-17
Reason: retested

Test 8 of 18

DIME Test ID: 2022-01-07-37-8
Test Method: AASHTO T51-13: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-18
Reason: corrected

Test 9 of 18

DIME Test ID: 2022-01-07-37-9
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 01/31/2022
Date Tested: 01/11/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Phase PAV residue
Test Plate Diameter 8 mm
Phase Angle (δ) (for the 10 cycles) 0.0 degree
(G*) x sin(δ)= 2698 kPa

Test 10 of 18

DIME Test ID: 2022-01-07-37-10
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 01/31/2022
Date Tested: 01/11/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Time test started no data HH:MM:SS
Flags issued by software during test no data
Correlation coefficient (R²) no data0
Regression coefficient a no data
Regression coefficient b no data
Regression coefficient c no data
Load at time 0.0 no data0 mN
Deflection at time 0.0 s no data0 µm
Load at time 0.5 s no data0 mN
Deflection at time 0.5 s no data0 µm
Load at 60.0 s no data0 mN
Beam deflection 60.0 s no data0 µm
Measured Stiffness Modulus 60.0 s 78.8 mPa
Estimated Stiffness Modulus 60.0 s no data
Difference between stiffness moduli 60.0 s no data
Estimated m-value 60.0 s 0.389

Test 11 of 18

DIME Test ID: 2022-01-07-37-11
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
This test has been superseded on 01/31/2022. The corrected test ID is: 2022-01-07-37-16
Reason: corrected

Test 12 of 18

DIME Test ID: 2022-01-07-37-12
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 02/03/2022
Date Tested: 01/07/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
The test was superseded from test ID: 2022-01-07-37-1
Test Result Compliance:
Additional Comments When Verified:
Phase Original binder
Test Plate Diameter 25 mm
Phase Angle (δ) (for the 10 cycles) 0.0 degree
Dynamic Shear, G*/sin(δ) 1.03 kPa

Test 13 of 18

DIME Test ID: 2022-01-07-37-13
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 02/03/2022
Date Tested: 01/07/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
The test was superseded from test ID: 2022-01-07-37-2
Test Result Compliance:
Additional Comments When Verified:
Is viscosity reading in cP/Pa-s? Pa-s
Time of test 7:00 HH:MM
Test Temperature 135 C
Speed 20 rpm
Spindle size 21 in
Torque 20 %
Viscosity reading #1 (A) 0.522 Pa-s
Viscosity reading #2 (B) 0.522 Pa-s
Viscosity reading #3 (C) 0.522 Pa-s
Average viscosity 0.522 Pa-s

Test 14 of 18

DIME Test ID: 2022-01-07-37-14
Test Method: AASHTO T48-18: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup
Verified Date: 02/03/2022
Date Tested: 01/07/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
The test was superseded from test ID: 2022-01-07-37-4
Test Result Compliance:
Additional Comments When Verified:
Units of measurement for Observed Flash Point (C or F) and Ambient barometric pressure (kP or mmHg) Celsius and mmHg
Observed Flash Point 337 C
Ambient Barometric Pressure 703 mmHg
Cleveland Open-Cup Flash Point in Celsius 337 C

Test 15 of 18

DIME Test ID: 2022-01-07-37-15
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 02/03/2022
Date Tested: 01/07/2022
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
General Comments for this Test: Submitted from ASCP bulk upload.
The test was superseded from test ID: 2022-01-07-37-5
Test Result Compliance:
Additional Comments When Verified:
Specific Gravity 1.034

Test 16 of 18

DIME Test ID: 2022-01-07-37-16
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
Data has not been verified.

Test 17 of 18

DIME Test ID: 2022-01-07-37-17
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
Data has not been verified.

Test 18 of 18

DIME Test ID: 2022-01-07-37-18
Test Method: AASHTO T51-13: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder)
Submitted By Organization: Ergon Asphalt & Emulsions
Organization Address: 3901 West Ponderosa Way,
Organization City: Las Vegas
Organization State: NV
Organization Zipcode: 89118
Organization Email: dan.virkler@ergon.com
Organization Phone: (702) 736-2059
Data has not been verified.