Sample Record for 2021-12-03-41
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212779 DEA: 021H5804 EFIS: 0216000024
QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-70-58.4/R78.4
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Mike Zdenek Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2021-12-03-41
TL Number from the TL Form: 876435
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Preliminary
Type of Material: Soil
Sample Taken Date: 12/03/2021
Date that the sample was received by the laboratory/organization performing the testing: 12/06/2021
The quantity of what the sample constitutes: Existing soil at 02-PLU-70-63.1
A brief description of the sample: 1 bag of soil for use in geogrid embankment design
From where was the sample collected: Job Site
Laboratory sample identification: D78985
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: N/A
Material Information
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: 02-PLU-70-63.09 from face of slope on North side of road, 0 to 0.83 ft. depth
Where the material sample would have been placed if not sampled: In situ
Test Results
Test 1 of 4
DIME Test ID: 2021-12-03-41-1
Test Method: CTM 203-February 2008: Mechanical Analysis of Soils
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive, MS-83,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
This test has been superseded on 01/21/2022. The corrected test ID is: 2021-12-03-41-3
Reason: retested
Test 2 of 4
DIME Test ID: 2021-12-03-41-2
Test Method: CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive, MS-83,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
This test has been superseded on 01/21/2022. The corrected test ID is: 2021-12-03-41-4
Reason: retested
Test 3 of 4
DIME Test ID: 2021-12-03-41-3
Test Method: CTM 203-February 2008: Mechanical Analysis of Soils
Verified Date: 01/21/2022
Date Tested: 01/14/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
The test was superseded from test ID: 2021-12-03-41-1
Test Result Compliance:
Additional Comments When Verified:
|
Cumulative percent passing the 3 in. sieve
|
100 %
|
|
Cumulative percent passing the 2 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
100 %
|
|
Cumulative percent passing the #4 sieve
|
99 %
|
|
Cumulative percent passing the #8 sieve
|
98 %
|
|
Cumulative percent passing the #16 sieve
|
96 %
|
|
Cumulative percent passing the #30 sieve
|
90 %
|
|
Cumulative percent passing the #50 sieve
|
79 %
|
|
Cumulative percent passing the #100 sieve
|
60 %
|
|
Cumulative percent passing the #200 sieve
|
51 %
|
|
Cumulative Percent Passing on 1 Micron
|
22 %
|
|
Cumulative Percent Passing on 5 Microns
|
32 %
|
Test 4 of 4
DIME Test ID: 2021-12-03-41-4
Test Method: CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)
Verified Date: 01/21/2022
Date Tested: 01/19/2022
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
The test was superseded from test ID: 2021-12-03-41-2
Test Result Compliance:
Additional Comments When Verified:
|
Plastic Index(PI)
|
15
|
|
Liquid Limit (LL)
|
34 %
|
|
Plastic Limit (PL)
|
19 %
|
