Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 8802 DEA: RR-ARB21 EFIS: RR-ARB21
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special Project for Round Robin of Asphalt Rubber Binder 2021
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2021-10-12-43
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Informational
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 10/12/2021
Date that the sample was received by the laboratory/organization performing the testing: 12/08/2021
The quantity of what the sample constitutes: 1 gallon can
A brief description of the sample: Asphalt Rubber Binder Roundrobin
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: National Blending Company
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2021-10-12-43-1
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 12/14/2021
Date Tested: 12/09/2021
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test: Sample heated to 163 degrees
Test Result Compliance: not applicable
Additional Comments When Verified:
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
73 C
|
|
Softening Point Sample 2
|
74 C
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2021-10-12-43-2
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 12/14/2021
Date Tested: 12/10/2021
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test: Sample heated to 163 degrees. tested in 33x97 mm can
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Determination
|
Unworked Penetration
|
|
Unworked Penetration
|
35 0.1 mm
|
DIME Test ID: 2021-10-12-43-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 12/14/2021
Date Tested: 12/10/2021
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test: Sample heated to 163 degrees. tested in 33x97 mm can
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Temperature
|
25 C
|
|
Ball Penetration (P1)
|
57 mm
|
|
Final Dial reading (F1)
|
no data0 mm
|
|
Ball Penetration (P2)
|
57 mm
|
|
Final Dial reading (F2)
|
no data0 mm
|
|
Ball Penetration (P3)
|
57 mm
|
|
Final Dial reading (F3)
|
no data0 mm
|
|
Resilience 1
|
43 %
|
|
Resilience 2
|
43 %
|
|
Resilience 3
|
43 %
|
|
Average Resilience
|
43 %
|
|
Minutes Reaction
|
no data
|
