DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 033E1004 Cty PLA Rte 80 PM 8.1/37.8
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 033E1004 Cty PLA Rte 80 PM 8.1/37.8 Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Martin Clark |
Date Reported: |
10/01/2014 |
|
|
Address: |
TL Number: |
|
||
|
City: |
||||
|
Project Name: IMPROVING VERTICAL CLEARANCE |
||||
|
Prime Contractor: RGW Construction Inc |
||||
|
Sample Taken Date: |
09/30/2014 |
Mix Design: |
z7a8543gg |
|
|
Contractor: Unknown |
Location : PLACER COUNTY IN AND NEAR LOOMIS, PENRYN, NEWCASTLE, WEIMAR, AND MAGRA FROM 0.1 MILE WEST OF BRACE ROAD OVERCROSSING TO 0.1 MILE EAST OF MAGRA OVERCROSSING |
|||
|
Structure unique identifier: Unknown |
||||
|
Structure name: Unknown |
||||
|
Location of Pour: |
||||
The following testing has been tested in accordance with:
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.27 | 6.00 | 2920.7 | 82569 | 1 |
| 2 | 28.27 | 6.00 | 2757.3 | 77950 | 1 |
DIME Test ID: 2014-09-30-1-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 2840
Comment on any defect in either specimen or caps (Max 250 Characters):
Age of specimen: 1 day
Certified By: Bang Nguyen
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing