Sample Record for 2021-10-28-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213598 DEA: 051F75U4 EFIS: 0518000092
QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-101-R36.9/47.7
Work Description: CRCP, SEISMIC RETROFIT, BRIDGE WIDENING AND MEDIAN BARRIER
Location Description: MONTEREY COUNTY IN AND NEAR KING CITY FROM 0.4 MILE SOUTH OF WILD HORSE ROAD OVERCROSSING TO TEAGUE AVENUE
Contractor Name: OHL USA, INC.
Contractor Address: 1920 Main St. Suite 310, Irvine, CA 92614
Resident Engineer: Adam Rianda Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2021-10-28-2
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 10/28/2021
Date that the sample was received by the laboratory/organization performing the testing: 11/05/2021
The quantity of what the sample constitutes: 300
A brief description of the sample: ASTM A325 Assembly
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name: Salinas River Bridge
The fabricator/manufacturer/facility name: Tru-fit Products of Utah
Material Information
Rocap Number(s):
Heat Number(s): NF12103854
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: ASTM A325
Bolt Length(s): 2
Nut Specification: n/a
Washer Specification: n/a
Finish: Mech Galv
Diameter/Size: 7/8 dia
Bolt Mfg. Lot Number: 323127A
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test Results
Test 1 of 13
DIME Test ID: 2021-10-28-2-1
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 2 of 13
DIME Test ID: 2021-10-28-2-2
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 3 of 13
DIME Test ID: 2021-10-28-2-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 4 of 13
DIME Test ID: 2021-10-28-2-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 5 of 13
DIME Test ID: 2021-10-28-2-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Gage Type
|
Pass
|
Test 6 of 13
DIME Test ID: 2021-10-28-2-6
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
2.2 mils
|
Test 7 of 13
DIME Test ID: 2021-10-28-2-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
2.19 mils
|
Test 8 of 13
DIME Test ID: 2021-10-28-2-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
2.15 mils
|
Test 9 of 13
DIME Test ID: 2021-10-28-2-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
2.17 mils
|
Test 10 of 13
DIME Test ID: 2021-10-28-2-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1E
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Measurement Average
|
2.16 mils
|
Test 11 of 13
DIME Test ID: 2021-10-28-2-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
31.25
|
|
Spacing
|
Ok
|
Test 12 of 13
DIME Test ID: 2021-10-28-2-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
31.05
|
|
Spacing
|
Ok
|
Test 13 of 13
DIME Test ID: 2021-10-28-2-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 11/18/2021
Date Tested: 11/17/2021
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
323127A
|
|
Finish Coating
|
ASTM B695 - Mech Galv
|
|
Product Markings
|
A325 N
|
|
Size
|
.875 in
|
|
Bolt Length
|
2 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
29.07
|
|
Spacing
|
Ok
|
