| Unit system used? | SI Units |
| Number of specimens | 6 |
| Test performed | With no density determined |
| Capped in accordance with? | ASTM C617/CTM521 |
| Average diameter of cylinder 1 | 6 mm |
| Average diameter of cylinder 2 | 6 mm |
| Average diameter of cylinder 3 | 6.01 mm |
| Average diameter of cylinder 4 | 6.01 mm |
| Average diameter of cylinder 5 | 6.01 mm |
| Average diameter of cylinder 6 | 6.01 mm |
| Cross sectional area of cylinder 1 | 28.27 mm^2 |
| Cross sectional area of cylinder 2 | 28.27 mm^2 |
| Cross sectional area of cylinder 3 | 28.37 mm^2 |
| Cross sectional area of cylinder 4 | 28.37 mm^2 |
| Cross sectional area of cylinder 5 | 28.37 mm^2 |
| Cross sectional area of cylinder 6 | 28.37 mm^2 |
| Compressive strength (to nearest 0.1MPa) | 1002.7 MPa |
| Maximum load on cylinder 1 | 28000 N |
| Maximum load on cylinder 2 | 28020 N |
| Maximum load on cylinder 3 | 28120 N |
| Maximum load on cylinder 4 | 28940 N |
| Maximum load on cylinder 5 | 28630 N |
| Maximum load on cylinder 6 | 28770 N |
| Type of fracture pattern of cylinder 1 | 2 |
| Compressive strength of cylinder 1 | 990.4 MPa |
| Compressive strength of cylinder 2 | 991.2 MPa |
| Compressive strength of cylinder 3 | 991.2 MPa |
| Compressive strength of cylinder 4 | 1020.1 MPa |
| Type of fracture pattern of cylinder 2 | 2 |
| Compressive strength of cylinder 5 | 1009.2 MPa |
| Compressive strength of cylinder 6 | 1014.1 MPa |
| Type of fracture pattern of cylinder 3 | 1 |
| Type of fracture pattern of cylinder 4 | 2 |
| Type of fracture pattern of cylinder 5 | 2 |
| Type of fracture pattern of cylinder 6 | 1 |
| Comment on any defect in either specimen or caps (Max 250 Characters) | no data |
| Correction factor for cylinder 1 | 1 |
| Correction factor for cylinder 2 | 1 |
| Correction factor for cylinder 3 | 1 |
| Correction factor for cylinder 4 | 1 |
| Correction factor for cylinder 5 | 1 |
| Correction factor for cylinder 6 | 1 |
| Age of specimen | 7 days |
| Age of specimen in hours | no data |