Print Report | Back to Sample Detail

Sample Record for 2021-03-02-32

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215073 DEA: 034H5604 EFIS: 0318000332 QA Service Level: 1
DIST-CO-RTE-PM: 03-PLA-65-R12.9/R13.1
Work Description: CONSTRUCT SLOPE PAVING AND PLACE EROSION CONTROL.
Location Description: PLACER COUNTY IN LINCOLN AT THE SOUTH INGRAM SLOUGH BRIDGE
Contractor Name: McCuen Construction, Inc.
Contractor Address: 3269 Swetzer Road, Loomis, CA,95690
Resident Engineer: Berhane Tesfagabar Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2021-03-02-32
TL Number from the TL Form: c764977
Sample Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 03/02/2021
Date that the sample was received by the laboratory/organization performing the testing: 03/02/2021
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: JMF21-008
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials Company - Roseville

Material Information

RAP Source: Vulcan Materials Roseville, RAP Bin 1
Aggregate Size:
Aggregate Source:
RAP Stockpile: Continuous
Stockpile Size (tons):
Reclaimed Asphalt Pavement Mix Number:
Test results on following page(s): 3

Test Results

Test

DIME Test ID: 2021-03-02-32-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/12/2021
Date Tested: 01/04/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-008.
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? no data
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 4.6 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data

Test

DIME Test ID: 2021-03-02-32-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/12/2021
Date Tested: 03/02/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-008.
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7407 grams
Mass of oven-dry sample in air for Sample 1 1795.4 grams
Mass of container filled with the sample and water for Sample 1 8507.9 grams
Temperature of Water 76 °F
Specific Gravity for Sample 1 2.585
Theoretical maximum density at 25°C (77°F) no data

Test

DIME Test ID: 2021-03-02-32-3
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 04/12/2021
Date Tested: 03/02/2021
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: JMF21-008.
Test Result Compliance: complies
Additional Comments When Verified:
Is an aggregate correction factor used? No
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99 %
Cumulative percent passing the 3/8 in. sieve 89 %
Cumulative percent passing the #4 sieve 63 %
Cumulative percent passing the #8 sieve 45 %
Cumulative percent passing the #16 sieve 35 %
Cumulative percent passing the #30 sieve 27 %
Cumulative percent passing the #50 sieve 19 %
Cumulative percent passing the #100 sieve 13 %
Cumulative percent passing the #200 sieve 9 %