Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214774 DEA: 081F1324 EFIS: 0815000212
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-95-64.5/80.5
Work Description: PLACE RHMA-G, COLD PLANE AC AND REPLACE AC SURFACING.
Location Description: SAN BERNARDINO COUNTY ON ROUTE 95 FROM 0.5 MILE NORTH OF GOFFS ROAD TO NEVADA STATE LINE.
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 38155 Monroe St, Indio, 92203, CA
Resident Engineer: Darcy Davis Structure Rep.: Unknown
DIME Sample ID: 2020-09-17-12
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/17/2020
Date that the sample was received by the laboratory/organization performing the testing: 09/18/2020
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 3/4" WMA-A-SP 0.25% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0537A-20
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Bullhead City Arizona
DIME Test ID: 2020-09-17-12-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/22/2020
Date Tested: 09/19/2020
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
no data
|
Corrected Asphalt Binder Content
|
5.44 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
Moisture Content
|
no data
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
no data
|