Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214689 DEA: 051M0204
QA Service Level: 1
DIST-CO-RTE-PM: 05-SBT-129-0.3/R2.6
Work Description: COLD PLANE AND OVERLAY EXISTING ROADWAY WITH RHMA-G.
Location Description: SAN BENITO COUNTY ABOUT 10 MILES EAST OF WATSONVILLE FROM 0.1 MILE WEST OF SCHOOL ROAD TO 0.1 MILE EAST OF ROUTE 101/129 SEPARATION
Contractor Name: CAL VALLEY CONSTRUCTION, INC.
Contractor Address: 5125 N. GATES AVENUE, SUITE 1, FRESNO CA 93722
Resident Engineer: Structure Rep.: Unknown
DIME Sample ID: 2020-07-09-27
TL Number from the TL Form: 972752
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Department Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 07/09/2020
Date that the sample was received by the laboratory/organization performing the testing: 07/13/2020
The quantity of what the sample constitutes: 1 can, TEST #1 (972752)
A brief description of the sample: Rubber Asphalt Binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number: 1
Sublot number: 1
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2020-07-09-27-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 07/22/2020
Date Tested: 07/21/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Determination
|
Worked Penetration
|
|
Worked Penetration
|
49 0.1 mm
|
DIME Test ID: 2020-07-09-27-2
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 07/22/2020
Date Tested: 07/21/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
no data
|
|
Ball Penetration (P1)
|
no data
|
|
Final Dial reading (F1)
|
no data
|
|
Ball Penetration (P2)
|
no data
|
|
Final Dial reading (F2)
|
no data
|
|
Ball Penetration (P3)
|
no data
|
|
Final Dial reading (F3)
|
no data
|
|
Resilience 1
|
no data
|
|
Resilience 2
|
no data
|
|
Resilience 3
|
no data
|
|
Average Resilience
|
22 %
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2020-07-09-27-3
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 07/22/2020
Date Tested: 07/20/2020
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
62 C
|
|
Softening Point Sample 2
|
no data
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
