Sample Record for 2020-04-22-9
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214190 DEA: 024G41U4 EFIS: 0218000047
QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS,SIS-5-Var
Work Description: REPLACE REINFORCED CONCRETE BRIDGES & CONSTRUCT RETAINING WALL.
Location Description: SHASTA AND SISKIYOU COUNTIES ABOUT 7 MILES NORTH OF POLLARD FLAT FROM 0.8 MILE SOUTH TO 0.7 MILE NORTH OF SIMS ROAD UNDERCROSSING AND FROM 0.6 MILE SOUTH OF CASTLE CRAGS DRIVE UNDERCROSSING TO 0.2 MILE SOUTH OF SOUTH DUNSMUIR UNDERCROSSING
Contractor Name: J.F. Shea Construction, Inc.
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Nicole Mallory Structure Rep.: Adam Scardaci
Sample Information
DIME Sample ID: 2020-04-22-9
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 04/22/2020
Date that the sample was received by the laboratory/organization performing the testing: 04/30/2020
The quantity of what the sample constitutes: 1
A brief description of the sample: Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber
Material Information
Mfg. Lot Number(s): 18333-2
Material/Compound/Elastomer ID: na
Samples Representing: 24
Description (size): 3"x14"x24"
Comments: Unknown
Description (Number of Shims): 6
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: na
Test Results
Test 1 of 4
DIME Test ID: 2020-04-22-9-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 05/07/2020
Date Tested: 05/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
72 f
|
|
Humidity
|
50 %
|
|
Reading #1
|
50
|
|
Reading #2
|
50
|
|
Reading #3
|
50
|
|
Reading #4
|
50
|
|
Reading #5
|
51
|
|
Mean
|
50.2
|
Test 2 of 4
DIME Test ID: 2020-04-22-9-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 05/07/2020
Date Tested: 05/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
Unit of the Ultimate Tensile Values
|
lbf per sqr in
|
|
UTM
|
2kip
|
|
Humidity
|
50.00 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.075
|
|
Sample 1 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 1 Ultimate Tensile
|
2563.03 lbf/in^2
|
|
Sample 1 Elongation (350% Min)
|
Pass
|
|
Sample 2 Median Thickness
|
0.076
|
|
Sample 2 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 2 Ultimate Tensile
|
2638.88 lbf/in^2
|
|
Sample 2 Elongation (350% Min)
|
Pass
|
|
Sample 3 Median Thickness
|
0.077
|
|
Sample 3 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 3 Ultimate Tensile
|
2075.53 lbf/in^2
|
|
Sample 3 Elongation (350% Min)
|
Pass
|
|
Sample 4 Median Thickness
|
0.079
|
|
Sample 4 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 4 Ultimate Tensile
|
2297.91 lbf/in^2
|
|
Sample 4 Elongation (350% Min)
|
Pass
|
|
Sample 5 Median Thickness
|
0.075
|
|
Sample 5 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 5 Ultimate Tensile
|
2266.43 lbf/in^2
|
|
Sample 5 Elongation (350% Min)
|
Pass
|
|
Median of the Ultimate Tensile Values
|
2297.9 lbf/in^2
|
Test 3 of 4
DIME Test ID: 2020-04-22-9-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 05/07/2020
Date Tested: 05/04/2020
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
UTM
|
2kip
|
|
Humidity
|
50.00 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.075
|
|
Sample 1 Tear Strength
|
233.4
|
|
Sample 2 Median Thickness
|
0.074
|
|
Sample 2 Tear Strength
|
241.5
|
|
Sample 3 Median Thickness
|
0.074
|
|
Sample 3 Tear Strength
|
249.5
|
|
Median of the Tear Strength Values
|
241.5 lb/in
|
Test 4 of 4
DIME Test ID: 2020-04-22-9-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 05/05/2020
Date Tested: 05/05/2020
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2020-04-22-9-2 | ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension | 05/04/2020 | Not scheduled | Steven Paine | CT HQ - Sacramento Structural Materials Testing Laboratory | | |
27280
