DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 041J0104 Cty ALA Rte 238 PM 16.7/20.9
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 041J0104 Cty ALA Rte 238 PM 16.7/20.9 Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Saeed Safi |
Date Reported: |
12/30/2019 |
|
|
Address: |
TL Number: |
172867 |
||
|
City: |
||||
|
Project Name: INSTALL SAFETY LIGHTING |
||||
|
Prime Contractor: Cen-Pac Engineering |
||||
|
Sample Taken Date: |
11/18/2019 |
Mix Design: |
1603374 |
|
|
Contractor: Unknown |
Location : ALAMEDA COUNTY IN SAN LEANDRO AT SOUTHBOUND ROUTE 238 / SOUTHBOUND ROUTE 880 CONNECTOR RAMP. |
|||
|
Structure unique identifier: |
||||
|
Structure name: |
||||
|
Location of Pour: Unknown |
||||
The following testing has been tested in accordance with:
ASTM C39-17a : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Average diameter of cylinder (in) | Cross sectional area of cylinder (in^2) | Maximum load on cylinder (lb) | Compressive strength of cylinder (psi) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 6.02 | 28.45 | 200065 | 7032.2 | 1 |
| 2 | 6.02 | 28.45 | 176109 | 6190.1 | 1 |
DIME Test ID: 2019-11-18-10-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 6610
Age of specimen: 42 days
Certified By: Larry McCrum
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing