Print Report | Back to Sample Detail

Sample Record for 2019-08-16-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213283 DEA: 060U09U4 EFIS: 0616000243 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-168-R36.0/65.9
Work Description: HMA RESURFACING AND REHAB CULVERTS
Location Description: FRESNO COUNTY IN AND NEAR SHAVER LAKE FROM 0.2 MILE WEST OF AUBERRY ROAD TO KAISER PASS ROAD
Contractor Name: Cal Valley Construction
Contractor Address: 5125 N. Gates Ave., Ste. 102, Fresno, CA, 93722-6414
Resident Engineer: Mark Mengoni Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-08-16-10
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 08/22/2019
The quantity of what the sample constitutes: 5
A brief description of the sample: 3/4 inch HMA 15%RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Millbrook construction Fresno Security Paving

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-08-16-10-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 12/17/2019
Date Tested: 08/29/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Translab internal lab no. 019-026 Dispute Resolution AASHTO T-308 Lot3 SL7
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method B
Mass of the specimen basket assembly no data
Mass of the specimen and specimen basket assembly prior to ignition no data
Mass of HMA Sample prior to ignition 2203.5 g
Corrected Asphalt Binder Content 4.52 %
Mass Loss no data
Mass of aggregate remaining after ignition 2096.7 g
Correction Factor (Percent by mass of HMA Specimen) 0.17 %
Moisture Content 0.16 %
Temperature Compensation Factor no data
Test Temperature 538 F