Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213888 DEA: 024H2704 EFIS: 0218000101
QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-44-34.0/43.2
Work Description: PLACE HMA (TYPE A) OVERLAY.
Location Description: SHASTA COUNTY AT AND NEAR VIOLA FROM 0.2 MILE EAST OF MILL CREEK ROAD TO 0.8 MILE EAST OF DEER FLAT ROAD
Contractor Name: TULLIS, INC.
Contractor Address: PO BOX 493416, REDDING CA 96022
Resident Engineer: NATHAN ALEXANDER Structure Rep.: Unknown
DIME Sample ID: 2019-04-22-8
TL Number from the TL Form: 736650
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 04/22/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/22/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined RAP (1/2-inch)
From where was the sample collected: Manufacturer
Laboratory sample identification: D77840B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Northstate Asphalt
RAP Source: Northstate Asphalt
Aggregate Size: Combined
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown
Reclaimed Asphalt Pavement Mix Number:
DIME Test ID: 2019-04-22-8-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/25/2019
Date Tested: 04/25/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
no data
|
|
Corrected Asphalt Binder Content
|
6.03 %
|
|
Mass Loss
|
no data
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
|
Moisture Content
|
no data
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
no data
|
DIME Test ID: 2019-04-22-8-2
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 06/25/2019
Date Tested: 04/25/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Total mass of material in the sample
|
1592.2 grams
|
|
Cumulative mass retained on the 2 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 1 1/2 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 1 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 3/4 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 1/2 in. sieve
|
141 grams
|
|
Cumulative mass retained on the 3/8 in. sieve
|
275.4 grams
|
|
Cumulative mass retained on the 1/4 in. sieve
|
554.2 grams
|
|
Cumulative mass retained on the #4 sieve
|
697.7 grams
|
|
Cumulative mass retained on the #8 sieve
|
960.4 grams
|
|
Cumulative mass retained on the #16 sieve
|
1134.4 grams
|
|
Cumulative mass retained on the #30 sieve
|
1250.5 grams
|
|
Cumulative mass retained on the #50 sieve
|
1341.9 grams
|
|
Cumulative mass retained on the #100 sieve
|
1409.1 grams
|
|
Cumulative mass retained on the #200 sieve
|
1451.9 grams
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
91.1 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
82.7 %
|
|
Cumulative percent passing the 1/4 in. sieve
|
65.2 %
|
|
Cumulative percent passing the #4 sieve
|
56.2 %
|
|
Cumulative percent passing the #8 sieve
|
39.7 %
|
|
Cumulative percent passing the #16 sieve
|
28.8 %
|
|
Cumulative percent passing the #30 sieve
|
21.5 %
|
|
Cumulative percent passing the #50 sieve
|
15.7 %
|
|
Cumulative percent passing the #100 sieve
|
11.5 %
|
|
Cumulative percent passing the #200 sieve
|
8.81 %
|
DIME Test ID: 2019-04-22-8-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/25/2019
Date Tested: 04/25/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
no data
|
|
Mass of container filled with water
|
7372 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1552 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8304 grams
|
|
Temperature of Water
|
25 °F
|
|
Specific Gravity for Sample 1
|
2.505
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
