Sample Record for 2019-06-11-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213724 DEA: 040K8404 EFIS: 0416000148
QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-680-13.9/22.7
Work Description: INSTALL FREEWAY SAFETY LIGHTING
Location Description: CONTRA COSTA COUNTY AT VARIOUS LOCATIONS FROM OLYMPIC BOULEVARD TO ARTHUR ROAD
Contractor Name: BAY CITIES PAVING AND GRADING INC
Contractor Address: PO Box 6227, Concord, CA 94524-6227
Resident Engineer: Amir Hatefi Structure Rep.: John Parecadan
Sample Information
DIME Sample ID: 2019-06-11-2
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 06/11/2019
Date that the sample was received by the laboratory/organization performing the testing: 06/18/2019
The quantity of what the sample constitutes: 49
A brief description of the sample: anchor bolt assemblies
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier: 07-CC
Structure name: NA
The fabricator/manufacturer/facility name: EDSCO Fasteners
Material Information
Rocap Number(s): NA
Heat Number(s): 188360
Nut Mfg. Lot Number(s): 2H/DH
Washer Mfg. Lot Number(s): NA
Bolt Specification: F1554Gr55
Bolt Length(s): 5'-0"
Nut Specification: A194Gr2HDH
Washer Specification: F436
Finish: galvanized
Diameter/Size: 2.5"
Bolt Mfg. Lot Number: 178035
Rocap Test Requirement(s): NA
Lubricant Requirements(s): Blue
Washer Inner Diameter(s):
Test Results
Test 1 of 15
DIME Test ID: 2019-06-11-2-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 1 | 178035 | 0.5 | 0.196 | 61706 | 88300 | 27.2 | Brian |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
Test 2 of 15
DIME Test ID: 2019-06-11-2-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 2 | 178035 | 0.5 | 0.196 | 64426 | 88890 | 27.3 | Brian |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
Test 3 of 15
DIME Test ID: 2019-06-11-2-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
178035
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2.5 in
|
|
Bolt Length
|
60 in
|
|
Gage Type
|
Pass
|
Test 4 of 15
DIME Test ID: 2019-06-11-2-4
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 5 of 15
DIME Test ID: 2019-06-11-2-5
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 6 of 15
DIME Test ID: 2019-06-11-2-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W5136
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LSF 2H/DH
|
|
Size
|
2.5 in
|
|
Gage Type
|
Pass
|
Test 7 of 15
DIME Test ID: 2019-06-11-2-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.1 mils
|
Test 8 of 15
DIME Test ID: 2019-06-11-2-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
5.63 mils
|
Test 9 of 15
DIME Test ID: 2019-06-11-2-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
314980
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.57 mils
|
Test 10 of 15
DIME Test ID: 2019-06-11-2-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
314980
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.68 mils
|
Test 11 of 15
DIME Test ID: 2019-06-11-2-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
26.52
|
|
Spacing
|
Ok
|
Test 12 of 15
DIME Test ID: 2019-06-11-2-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
DDZD
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
2H DH D/N
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.95
|
|
Spacing
|
Ok
|
Test 13 of 15
DIME Test ID: 2019-06-11-2-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
W5136
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LSF 2H/DH
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.68
|
|
Spacing
|
Ok
|
Test 14 of 15
DIME Test ID: 2019-06-11-2-14
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
314980
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
41.15
|
|
Spacing
|
Ok
|
Test 15 of 15
DIME Test ID: 2019-06-11-2-15
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/21/2019
Date Tested: 06/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
314980
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2.5 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
41.5
|
|
Spacing
|
Ok
|
