Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 210808 DEA: 020E0904 EFIS: 0200000016
QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-5-R29.3/R31.1,R45.0/R45.8
Work Description: REPLACE BRIDGE, REALIGN ROADWAY AND SEISMIC RETROFIT
Location Description: IN SHASTA COUNTY ABT 8 MI N OF SHASTA LAKE CTY AND NEAR LAKEHEAD FRM TURNTABLE BAY O/C TO 0.1 MI N OF O'BRIEN SRRA & FRM 0.4 MI S TO 0.3 MI N OF DOG CREEK BRIDGE.
Contractor Name: GOLDEN STATE BRIDGE, INC.
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Nathan Alexander Structure Rep.: Christopher S 'Chris' Brace
DIME Sample ID: 2019-04-25-16
TL Number from the TL Form: 001902
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 04/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/25/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 1/2-inch RAP
From where was the sample collected: Manufacturer
Laboratory sample identification: D77852B
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Northstate Asphalt
RAP Source: Northstate Asphalt
Aggregate Size: Combined
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown
Reclaimed Asphalt Pavement Mix Number:
DIME Test ID: 2019-04-25-16-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/29/2019
Date Tested: 04/26/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
no data
|
|
Corrected Asphalt Binder Content
|
5.95 %
|
|
Mass Loss
|
no data
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
|
Moisture Content
|
no data
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
no data
|
DIME Test ID: 2019-04-25-16-2
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 05/29/2019
Date Tested: 04/29/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Total mass of material in the sample
|
1534.3 grams
|
|
Cumulative mass retained on the 2 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 1 1/2 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 1 in. sieve
|
no data0 grams
|
|
Cumulative mass retained on the 3/4 in. sieve
|
8.9 grams
|
|
Cumulative mass retained on the 1/2 in. sieve
|
154.2 grams
|
|
Cumulative mass retained on the 3/8 in. sieve
|
334.1 grams
|
|
Cumulative mass retained on the 1/4 in. sieve
|
562.5 grams
|
|
Cumulative mass retained on the #4 sieve
|
699.8 grams
|
|
Cumulative mass retained on the #8 sieve
|
929.6 grams
|
|
Cumulative mass retained on the #16 sieve
|
1094.7 grams
|
|
Cumulative mass retained on the #30 sieve
|
1211.5 grams
|
|
Cumulative mass retained on the #50 sieve
|
1302.6 grams
|
|
Cumulative mass retained on the #100 sieve
|
1368.2 grams
|
|
Cumulative mass retained on the #200 sieve
|
1408.4 grams
|
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
99.4 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
89.9 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
78.2 %
|
|
Cumulative percent passing the 1/4 in. sieve
|
63.3 %
|
|
Cumulative percent passing the #4 sieve
|
54.4 %
|
|
Cumulative percent passing the #8 sieve
|
39.4 %
|
|
Cumulative percent passing the #16 sieve
|
28.7 %
|
|
Cumulative percent passing the #30 sieve
|
21 %
|
|
Cumulative percent passing the #50 sieve
|
15.1 %
|
|
Cumulative percent passing the #100 sieve
|
10.8 %
|
|
Cumulative percent passing the #200 sieve
|
8.21 %
|
DIME Test ID: 2019-04-25-16-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/29/2019
Date Tested: 04/26/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
no data
|
|
Mass of container filled with water
|
7372 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1641 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8362 grams
|
|
Temperature of Water
|
25 °F
|
|
Specific Gravity for Sample 1
|
2.521
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
