Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213606 DEA: 081E6104 EFIS: 0814000055
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-62-41.0/41.5and60.6/61.1
Work Description: WIDENING OF SHOULDER AND INSTALLING RUMBLE STRIPS
Location Description: SAN BERNARDINO COUNTY NEAR TWENTYNINE PALMS FROM 0.7 MILE TO 1.2 MILES EAST OF GODWIN ROAD AND FROM 5.6 MILES TO 6.1 MILES EAST OF IRONAGE ROAD
Contractor Name: All American Asphalt
Contractor Address: 400 E 6th STREET, Corona CA, 92878
Resident Engineer: Samer Georges Structure Rep.: Unknown
DIME Sample ID: 2019-05-18-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/18/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/20/2019
The quantity of what the sample constitutes: 2 boxes 231.89 tons out
A brief description of the sample: 3/4" RHMA-G (0.5% LAS)
From where was the sample collected: Source
Laboratory sample identification: 0287G-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Perris
DIME Test ID: 2019-05-18-3-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/23/2019
Date Tested: 05/22/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
no data
|
Corrected Asphalt Binder Content
|
7.79 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
Moisture Content
|
no data
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
no data
|