Print Report | Back to Sample Detail

Sample Record for 2019-03-27-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-27-15
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 03/27/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/27/2019
The quantity of what the sample constitutes: 1 sample set
A brief description of the sample: Asphalt Rubber Binder
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero

Material Information

Asphalt modifier supplier: Valero
Performance Grade:
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2019-03-27-15-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 04/04/2019
Date Tested: 04/01/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: JMFPP: D217 Asphalt Rubber Binder Design and Profile (unworked)
Test Result Compliance:
Additional Comments When Verified:
Determination Unworked Penetration
Unworked Penetration 25 0.1 mm

Test 2 of 4

DIME Test ID: 2019-03-27-15-2
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 04/04/2019
Date Tested: 04/01/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: JMFPP: D5329 Asphalt Rubber Binder Design and Profile (unworked)
Test Result Compliance:
Additional Comments When Verified:
Temperature no data
Ball Penetration (P1) no data
Final Dial reading (F1) no data
Ball Penetration (P2) no data
Final Dial reading (F2) no data
Ball Penetration (P3) no data
Final Dial reading (F3) no data
Resilience 1 no data
Resilience 2 no data
Resilience 3 no data
Average Resilience 51 %
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2019-03-27-15-3
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 04/04/2019
Date Tested: 04/01/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: JMFPP: D36 Asphalt Rubber Binder Design and Profile (unworked)
Test Result Compliance:
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 155 C
Softening Point Sample 2 no data
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2019-03-27-15-4
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 04/04/2019
Date Tested: 04/01/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: JMFPP: D7741 Asphalt Rubber Binder Design and Profile (unworked)
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature 60 F
Average Viscosity 1700.0
Minutes Reaction no data