Print Report | Back to Sample Detail

Sample Record for 2018-11-07-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-11-07-5
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Department Acceptance
Type of Material: Cable Yield Indicator
Sample Taken Date: 11/07/2018
Date that the sample was received by the laboratory/organization performing the testing: 12/03/2018
The quantity of what the sample constitutes: Unknown
A brief description of the sample: Cable yeild indicator assemblies
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cable Moore

Material Information

Heat Number(s): 166553
Lot Number(s): B9-096-18
Lot Size(s): 500
Number of Samples: 8
Test results on following page(s): 8

Test Results

Test 1 of 8

DIME Test ID: 2018-11-07-5-1
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 1
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 36978 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 2 of 8

DIME Test ID: 2018-11-07-5-2
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 2
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 38705 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 3 of 8

DIME Test ID: 2018-11-07-5-3
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 3
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 39757 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 4 of 8

DIME Test ID: 2018-11-07-5-4
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 4
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 34939 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 5 of 8

DIME Test ID: 2018-11-07-5-5
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 5
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 40500 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 6 of 8

DIME Test ID: 2018-11-07-5-6
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 6
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 37250 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 7 of 8

DIME Test ID: 2018-11-07-5-7
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 7
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 38920 lbf
Halt of Force Yield (lbf) no data
Tested By Fred

Test 8 of 8

DIME Test ID: 2018-11-07-5-8
Test Method: CALTRANS StdSpec-10: Section 75-1.03E(2)(b) Cable Yield Indicator (Cable Yield Indicator)
Verified Date: 12/14/2018
Date Tested: 12/14/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM 67kip
Test Temperature (F) 72 °F
Sample 8
Lot B909618
Height (in) no data
Inner Diameter (in) no data
Outer Diameter (in) no data
Peak Load (lbf) 38966 lbf
Halt of Force Yield (lbf) no data
Tested By Fred