Sample Record for 2018-05-21-8
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212996 DEA: 023H1404
QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI,SHA-36-0.0/R3.5,0.0/4.0
Work Description: AC OVERLAY, REPLACE AC SURFACE, GUARDRAIL, SHOULDER BACKING
Location Description: SHASTA AND TRINITY COUNTIES FROM TRINITY COUNTY LINE TO 0.4 MILE EAST OF HARRISON GULCH ROAD AND FROM HUMBOLDT COUNTY LINE TO 0.2 MILE EAST OF MAD RIVER ROAD
Contractor Name: TULLIS, INC.
Contractor Address: Unknown
Resident Engineer: MANDHIR GREWAL Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2018-05-21-8
TL Number from the TL Form: 002140
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/21/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/22/2018
The quantity of what the sample constitutes: JMF Verification Renewal
A brief description of the sample: Combined Treated Virgin Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77409
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis, Inc - Northstate Asphalt - Redding, CA
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: L170304
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 17-04-R1
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 1
DIME Test ID: 2018-05-21-8-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/27/2018
Date Tested: 05/25/2018
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
HMA Gradation
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
91.8 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
68.3 %
|
|
Cumulative percent passing the 1/4 in. sieve
|
49.7 %
|
|
Cumulative percent passing the #4 sieve
|
44 %
|
|
Cumulative percent passing the #8 sieve
|
29.7 %
|
|
Cumulative percent passing the #16 sieve
|
19.4 %
|
|
Cumulative percent passing the #30 sieve
|
13.7 %
|
|
Cumulative percent passing the #50 sieve
|
9.8 %
|
|
Cumulative percent passing the #100 sieve
|
7.3 %
|
|
Cumulative percent passing the #200 sieve
|
5.66 %
|
