Print Report | Back to Sample Detail

Sample Record for 2018-06-21-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212031 DEA: 021H8804 EFIS: 0216000015 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-VAR-VAR
Work Description: POLYESTER CONCRETE OVERLAY, JOINT SEALS, HMA, GUARDRAIL, STRIPING
Location Description: SHASTA COUNTY AT VARIOUS LOCATIONS
Contractor Name: J.F. Shea Construction, Inc
Contractor Address: 17400 Clear Creek Road, Redding, CA 96049
Resident Engineer: Joel Gaskil Structure Rep.: Dave Mann

Sample Information

DIME Sample ID: 2018-06-21-11
TL Number from the TL Form: T101 C 736693
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/21/2018
Date that the sample was received by the laboratory/organization performing the testing: 06/22/2018
The quantity of what the sample constitutes: 2 boxs
A brief description of the sample: 3/4 HMA A 25 rap, PG58-34m
From where was the sample collected: Manufacturer
Laboratory sample identification: D77470
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Fawndale

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2018-06-21-11-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
Data has not been verified.

Test 2 of 2

DIME Test ID: 2018-06-21-11-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
Data has not been verified.