Print Report | Back to Sample Detail

Sample Record for 2026-10-13-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1002474 DEA: 043Y5804 EFIS: 0423000263 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-580-0/R5.1
Work Description: CONSTRUCTION ON STATE HIGHWAY IN CONTRA COSTA COUNTY IN RICHMOND AT VARIOUS LOCATIONS FROM 0.2 MILE SOUTH OF CENTRAL AVENUE OVERCROSSING TO CASTRO STREET UNDERCROSSING
Location Description: Route 580
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Lee Keslerwest Structure Rep.: Eric Racadag

Sample Information

DIME Sample ID: 2026-10-13-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 385-7413
Type of Sample: Acceptance
Type of Material: Polyester
Sample Taken Date: 10/13/2026
Date that the sample was received by the laboratory/organization performing the testing: 10/13/2026
The quantity of what the sample constitutes: 5 tests
A brief description of the sample: POLYESTER CONCRTE COMPACTION TEST
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: 580 HWY Castro ST Overpass

Material Information

Mfg. Lot Number(s): #1 test first 200ft
Batch Number: #1
Mix number: 123

Test Results

Test

DIME Test ID: 2026-10-13-3-1
Test Method: CTM 552-December 2013: Method of Test for Relative Compaction of Polymer Concrete Utilizing Nuclear Gages
Verified Date: 10/13/2026
Date Tested: 10/13/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: #1 first 200ft
Test Result Compliance: complies
Additional Comments When Verified:
Gage No. 691
Time of test 12:00 HH:MM
Standard Density 2.42 g/cc
In-Place Density 2.31 g/cc
Percent Relative Compaction 96 %

Test

DIME Test ID: 2026-10-13-3-2
Test Method: CTM 552-December 2013: Method of Test for Relative Compaction of Polymer Concrete Utilizing Nuclear Gages
Verified Date: 10/13/2026
Date Tested: 10/13/2026
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test: #2 next 200ft
Test Result Compliance: complies
Additional Comments When Verified:
Gage No. 691
Time of test 1:00 HH:MM
Standard Density 2.42 g/cc
In-Place Density 2.32 g/cc
Percent Relative Compaction 96 %