Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 66665 DEA: BMD EFIS: BMD
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Balanced Mix Design (BMD) data for hot mix asphalt. UCPRC is collecting BMD data from the test track built for accelerated pavement testing
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2026-08-19-75
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: JMF Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/19/2026
Date that the sample was received by the laboratory/organization performing the testing: 03/30/2026
The quantity of what the sample constitutes: 24 boxes
A brief description of the sample: 3/8'' HMA-A with 16.0.% RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Mariatta
HMA Type: Type A HMA
HMA Grading: 3/8 inch
Lot number: 0
Sublot number: 0
HMA Mix Number: 0
Binder content (%): 6.6
Virgin binder PG: PG 76-22 M
Design binder PG: PG 76-22 M
Binder Supplier: N/A
RAP content (%): 16
WMA Additives: No
Antistrip type: Ad-here XL9000
DIME Test ID: 2026-08-19-75-5
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 10/06/2026
Date Tested: 10/06/2026
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
2
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Water
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of oven-dry sample in air for Sample 1
|
1670.1 grams
|
|
Mass of sample in water for Sample 1
|
1021.8 grams
|
|
Mass of oven-dry sample in air for Sample 2
|
1599.8 grams
|
|
Mass of sample in water for Sample 2
|
980.1 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.576
|
|
Specific Gravity for Sample 2
|
2.582
|
|
Average Specific Gravity
|
2.579
|
|
Theoretical maximum density at 25°C (77°F)
|
160.5 lb/ft^3
|
DIME Test ID: 2026-08-19-75-6
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
Data has not been verified.
DIME Test ID: 2026-08-19-75-7
Test Method: ASTM D8360-22: Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test (Rutting Tolerance)
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
Data has not been verified.
DIME Test ID: 2026-08-19-75-8
Test Method: ASTM D8225-19: Standard Test Method For Determination Of Cracking Tolerance Index Of Asphalt Mixture Using The Indirect Tensile Cracking Test At Intermediate Temperature
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
Data has not been verified.
DIME Test ID: 2026-08-19-75-9
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
Data has not been verified.
