Print Report | Back to Sample Detail

Sample Record for 2026-09-17-34

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001613 DEA: 060V6104 EFIS: 0616000222 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-119-28.2/31.3
Work Description: HMA (TYPE A), RCP, CLASS 2 AB, ROADWAY EXC, AND MODIFYING SIGNAL.
Location Description: KERN COUNTY IN AND NEAR BAKERSFIELD FROM 0.1 MILE WEST OF ASHE ROAD TO ROUTE 119/99 SEPARATION
Contractor Name: Griffith Company (Austin Fitch)
Contractor Address: 1128 Carrier Parkway, Bakersfield ,CA 93308
Resident Engineer: Mandeep Chahal Structure Rep.: Albert Heredia

Sample Information

DIME Sample ID: 2026-09-17-34
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/17/2026
Date that the sample was received by the laboratory/organization performing the testing: 09/18/2026
The quantity of what the sample constitutes: L1SL10
A brief description of the sample: 3/4" HMA- A 15% RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith, Edmonston

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 10
HMA Mix Number:
Binder content (%): 4.7
Virgin binder PG: PG 70-10
Design binder PG: PG 70-10
Binder Supplier: san Joaquin refinery
RAP content (%): 15
WMA Additives: No
Antistrip type: Lime
Test results on following page(s): 2

Test Results

Test

DIME Test ID: 2026-09-17-34-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/18/2026
Date Tested: 09/18/2026
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 4375.8 g
Mass of the specimen and specimen basket assembly prior to ignition 6684.6 g
Corrected Asphalt Binder Content 4.85 %
Mass of HMA Sample prior to ignition 2308.8 g
Mass Loss 127.5 g
Mass of aggregate remaining after ignition 2181.3 g
Correction Factor (Percent by mass of HMA Specimen) 0.67 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test

DIME Test ID: 2026-09-17-34-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/21/2026
Date Tested: 09/18/2026
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.414
Bulk Specific Gravity 2 2.431
Bulk Specific Gravity 3 2.432
Average Bulk Specific Gravity 2.426