Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001565 DEA: 030J4404 EFIS: 0319000285
QA Service Level: 1
DIST-CO-RTE-PM: 03-BUT-162-15.6/18.5
Work Description: COLD PLANE AC PVMT, HMA, MINOR CONCRETE, SIGNAL AND LIGHTING SYSTEM.
Location Description: BUTTE COUNTY IN OROVILLE FROM FEATHER RIVER BRIDGE TO FOOTHILL BOULEVARD
Contractor Name: Teichert & Son, Inc.
Contractor Address: 4401 Duluth Ave., Rocklin CA 95765
Resident Engineer: Dwayne Grandy Structure Rep.: Unknown
DIME Sample ID: 2026-09-14-43
TL Number from the TL Form: C955877
Sample Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Sample Organization Contact: (530) 741-4238
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/14/2026
Date that the sample was received by the laboratory/organization performing the testing: 09/15/2026
The quantity of what the sample constitutes: 2 Boxes
A brief description of the sample: 1/2" RHMA-O
From where was the sample collected: Source
Laboratory sample identification: Daily Sample 26-281
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Teichert Hallwood
DIME Test ID: 2026-09-14-43-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/17/2026
Date Tested: 09/16/2026
Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory
Organization Address: 5330 Arboga Road,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test: L1
OBC 7.2%
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1666.3 g
|
|
Corrected Asphalt Binder Content
|
7.11 %
|
|
Mass Loss
|
122.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.26 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.02 %
|
|
Test Temperature
|
538 C
|